Yamaha DVD-S795 manual Self-diagnosis display function

Symptom (DVD)	Remedy
No subtitles.	ÁSubtitles appear only with discs which contain them.
	ÁSubtitles are cleared from the TV monitor. Perform the steps on page 28 to
	display the subtitles.
Alternative audio soundtrack (or subtitle)	ÁAn alternative language is not selected with discs which do not contain more than
languages fail to be selected.	one language.
	ÁIn the case of some discs, the alternative language cannot be selected by
	operating the AUDIO or SUBTITLE button. Try selecting it from the DVD menu if
	one is available.
Angle cannot be changed.	This function is dependent on software availability. Even if a disc has a number of
	angles recorded, these angles may be recorded for specific scenes only (when
	“ANGLE” lights up on the player’s FL display).
Play does not start even when title is	Confirm the “2 Ratings” setting.
selected.
Audio soundtrack and/or subtitle	If the audio soundtrack and/or subtitle language does not exist on the disc, the
language is not the one selected at the	language selected at the initial settings will not be seen/heard.
initial settings.
The menu is displayed in French	The setup “3 Menus” of “1 Disc Languages” is set to French: select English.
(example).
No surround sound	Choose the correct setup at the “8 Speaker Setting” which matches your stereo
	system.
The password for rating level has been	Reset all the settings to Factory Preset.
forgotten.	While the player is in the stop mode, hold the player’s SKIP (H) button and the
	PAUSE button down simultaneously and then hold the OPEN/CLOSE button down
	for longer than 3 seconds (until “Initialized” disappears from the TV monitor). The
	lock will be released and all initial settings will return to the default values.
Symptom (Video CD)	Remedy
No menu play.	This function works only for Video CDs with playback control.

Self-diagnosis display function

When an error or trouble is detected during operation, a service number appears in the FL display.

When a service number has appeared, check out the details given below.

Service number	Player status	Remedy
	Disc is dirty.	Wipe the disc clean.
	Trouble is likely to have occurred. The	Press POWER to set the player to the standby mode and then
	number following “H” differs depending	back to ON. Alternatively, press POWER to set the player to
stands	on the status of the player.	the standby mode, disconnect the AC cord, and then re-
for a number.		connect it.
ÁIf the service number fails to be cleared even when the remedial action is taken, ask the service technician to repair the player.
			For YourReference

47