Furuno GP-1650F, GP-1650DF manual Entering Marks, Plotter display

Page 39

5. MARK

The mark can be entered up to 5000 points together with tracks. The apportion between track and mark memory can be changed at menu.

In the FISHING mode, pressing the [HIDE/ SHOW] key changes the function of the soft keys as follows.

Plotter display

5.1Entering Marks

Select the fishing mode to enable entry of marks on the PLOTTER display. Select the location desired with the cursor, or turn off the cursor to enter the mark at own ship po- sition. Pressing the [HIDE/SHOW] key changes the function of soft keys. Press the soft key MARK ENTRY to enter the mark. The mark is entered in the shape and color selected from the MARK SHAPE and MARK COLOR windows.

34°	12.345’ N	CSE	245.8°	COURSE
135° 12.345’ E		SPD	16.3kt	UP
	QP<01>			ZOOM
	QP<01>			IN
				ZOOM
				OUT
				AUTO
				C.U.
DGPS 3D				NAV
DGPS 3D				WPT

Press the [HIDE/SHOW] key.

34°	12.345’ N	CSE	245.8°	COURSE
135° 12.345’ E		SPD	16.3kt	UP
	QP<01>			STOP
	QP<01>			TRACK
				TRACK
				COLOR
				MARK
				ENTRY
				MARK
				EDIT
DGPS 3D				NAV
DGPS 3D				WPT

Press the [HIDE/SHOW] key.

34°	12.345’ N	CSE	245.8°	COURSE
135° 12.345’ E		SPD	16.3kt	UP
	QP<01>
DGPS 3D

Press the [HIDE/SHOW] key.

Soft key

to enter mark.

QP<01>

DGPS 3D

Press the [HIDE/SHOW] key.

Figure 5-1 Changing displays

(PLOTTER display)

5-1

Image 39

Contents Color DGPS/PLOTTER/SOUNDER Color GPS/PLOTTER/SOUNDER 199 Do not operate the equipment with wet hands About the TFT LCDDo not open the equipment Do not disassemble or modify the equipmentTable of Contents Iii SpecificationsSounder Setup Options Declaration of ConformityFeatures ForewordWord to GP-1650DF/1650F Owners Display Unit System ConfigurationThis page is intentionally left blank Display Unit Controls Operational OverviewDisplay abbreviations Inserting Mini Chart CardTurning the Power On/Off Turning the power offAdjusting Tone and Brilliance Plotter DisplaysSelecting a display Normal Sounder Display Sounder DisplaysMenu Operation, Soft Keys Plotter/Sounder DisplayDemonstration Display 10 Demo setting screenThis page is intentionally left blank Principle of Operation Video Sounder OperationSounder Display Description Normal sounder display indications, markersKHz picture Bottom-lock display Selecting sounder display modeBottom-zoom display Marker zoom displayEnter Plotter/Sounder DisplayDual-frequency Display Scope displayManual Sounder Operation Automatic Sounder OperationRange shifting Adjusting the gainMeasuring Depth Selecting display rangeSuppressing Low Level Noise Suppressing InterferenceWhite Marker Erasing Weak EchoesSelecting Picture Advance Speed Selecting Background and Echo ColorsBackground and echo colors Alarms Bottom echo Interpreting the DisplayZero line Fish school echoes34 Surface noise/aeration Surface noise/AerationCourse-up Plotter DisplaysPresentation Modes North-upShifting the Display Selecting Chart Scale/RangeMini Chart Cards CursorFuruno mini chart card Indices and chart enlargementRemarks on chart display Chart symbolsPort service icons Nav-Charts cards Comparison of Furuno and Nav-Charts chart cardsAid to navigation data Navigation Data Display Enlarging an indicationGPS satellite monitor display How to read the compass display Steering DisplayBeacon information display How to read the XTE scale Setting the range of the XTE scaleHighway Display Fishing Changing Operation ModeFifure 3-16 Display setup1 menu Navigation Trip DistanceTrack Displaying TrackTracking Track plotting method Stopping/Restarting Plotting of TrackChanging Track Color Track Plotting Method, IntervalChanging Track Memory Capacity Track plotting intervalTrack Memory Erasing All Track Mark Entering MarksPlotter display Changing Mark Attributes Video sounder displayVideo sounder display Changing Mark Size TionsSmall Erasing whole marks/lines Erasing MarksDisplaying Track and Mark Points Erasing individual marks/linesEntering waypoints at MOB position WaypointsEntering Waypoints Entering waypoints at own ship’s positionChanging the shape and color of waypoint mark Waypoint menuChanging waypoint position Changing waypoint name, comment, proximity alarm radiusEntering waypoints by range and bearing Entering waypoints by latitude and longitude positionErasing waypoints by the cursor Erasing Individual WaypointsChanging Waypoint Data Erasing waypoints through the waypoint listWaypoint Mark Size Changing Waypoint Position on the Plotter DisplaySearching Waypoints This page is intentionally left blank Abcdef RoutesEntering Routes Entering routes through the route listInserting waypoints through the route list Connecting RoutesInserting, Removing Waypoints Entering routes by the cursorWPT Inserting waypoints on the plotter displayRemoving waypoints from routes Alph ListRemoving route waypoints from the plotter display Creating Track-based RoutesSave icon appearance On the plotter display Erasing RoutesThis page is intentionally left blank Navigating to a single quick point NavigationNavigating to Quick Points Selecting quick point entry methodNavigating to Waypoints waypoint list Navigating to Ports, Port ServicesNavigate along specific leg of route Following a RouteNavigate route waypoints in reverse order Navigate directly to a route waypointSetting speed for ETA calculation Switching waypointsRestarting navigation Cancelling Navigation This page is intentionally left blank Introduction Plotter AlarmsAudio Alarm On/Off Arrival AlarmXTE Cross Track Error Alarm Anchor Watch AlarmProximity Alarm Speed AlarmAlarm Information Alarm messagesAlarm messages and their meanings Saving data Saving Data to Memory CardFormatting Memory Cards 10-1Data overwrite Error messageLoading Data from Memory Card 10-2Waypoint/route Configuration10-3 TrackThis page is intentionally left blank 11-1 Chart Setup Options menuChart Offset menu Customizing Your Unit11-2 Chart Details menuChart details menu description Display Options menu11-3 Display setup1 menu description11-4 Display SETUP2 menu descriptionGPS Setup Options menu description 11.3 GPS/DGPS/TD Options menu11-5 Dgps Setup Options menu Dgps Setup Options11-6 Displaying Loran C TDs TD Setup menuTD Setup 11-711-8 Sounder Setup Options menuSounder Setup Options menu description Range Setup soft keyEcho Offset 200kHz, Echo Offset 50kHz System Setup soft keySystem Setup menu description 11-911-10 Configuration menuSetup Nmea Port 1 menu description Setup NMEA/DGPS Port 2 menu descriptionDownload waypoint/route to PC 11-11UPLOAD/DOWNLOAD Data menu XON/XOFF22 Connection of GP-1650DF/GP-1650F to PC 11-1211-13 System menuSystem Menu description This page is intentionally left blank Using C-MAP NT Model Example of caution area window 12-2Objects window 12-313 Plotter display 12-4Setting Chart Setup Options 20 Depth Info display 12-621 Memory, I/O test results 12-7This page is intentionally left blank 13-1 Maintenance & TroubleshootingMaintenance Recommended maintenance program13-2 Replacement of Fuse, BatterySimple Troubleshooting Simple troubleshooting plotter13-3 Error MessagesSimple troubleshooting sounder Error messagesTest Diagnostic Tests13-4 Memory, I/O port test13-5 Keyboard testDisplay test 13-6 Clearing MemoriesMenu Tree Furuno chartSounder Setup Options Audio Alarm ON, OFF Loran C Chains Decca Chains World Time Geodetic Chart List Plotter GeneralGPS Receiver Display SectionCoating Color Index-1 IndexIndex-2 Index-3