Furuno GP-1650F manual Customizing Your Unit, Chart Setup Options menu, 11-1, Chart Offset menu

Page 69

11. CUSTOMIZING YOUR UNIT

This section describes the various options which allow you to set up your unit to suit your needs.

11.1CHART SETUP OPTIONS menu

The chart offset options menu provides three menus: chart offset, track control, and chart details.

1.Press the [MENU] key to open the main menu.

2.Press the soft key CHART SETUP OP-

TIONS.

CHART

SETUP

CHART OFFSET

TRACK CONTROL

CHART DETAILS

DGPS 3D

 

RETURN

 

 

 

Figure 11-1 Chart setup options menu

CHART OFFSET menu

In some instances position may be off by a few minutes. For example, the position of the ship is shown to be at sea while it is in fact moored at a pier. You can compensate for this error by offsetting chart position as fol- lows:

1.Press the [MENU] key followed by the soft keys CHART SETUP OPTIONS and

CHART OFFSET.

34°

12.345’ N

FROM 16.41 nm

CHART

135°

12.345’ E

OS

276.9°

OFFSET

 

 

 

 

ZOOM

 

 

 

 

IN

 

 

 

 

ZOOM

 

 

 

 

OUT

 

 

 

 

SET

 

 

 

 

OFFSET

 

 

 

 

RESET

 

 

 

 

OFFSET

DGPS 3D

 

 

 

RETURN

 

 

 

 

Figure 11-2 Plotter display,

chart offset selected

2.Use the cursor pad to place the cursor where to offset chart position.

3.Press the soft key SET OFFSET.

4.Press the soft key RETURN to finish.

To cancel chart offset, press the soft key RE- SET OFFSET at step 3 in the above proce- dure.

TRACK CONTROL menu

This menu mainly controls track color and track plotting interval. For further details see Chapter 4.

11-1

Image 69
Contents Color DGPS/PLOTTER/SOUNDER Color GPS/PLOTTER/SOUNDER 199 Do not open the equipment About the TFT LCDDo not disassemble or modify the equipment Do not operate the equipment with wet handsTable of Contents Sounder Setup Options SpecificationsDeclaration of Conformity IiiFeatures ForewordWord to GP-1650DF/1650F Owners Display Unit System ConfigurationThis page is intentionally left blank Display Unit Controls Operational OverviewTurning the Power On/Off Inserting Mini Chart CardTurning the power off Display abbreviationsAdjusting Tone and Brilliance Plotter DisplaysSelecting a display Menu Operation, Soft Keys Sounder DisplaysPlotter/Sounder Display Normal Sounder DisplayDemonstration Display 10 Demo setting screenThis page is intentionally left blank Principle of Operation Video Sounder OperationSounder Display Description Normal sounder display indications, markersKHz picture Bottom-zoom display Selecting sounder display modeMarker zoom display Bottom-lock displayDual-frequency Display Plotter/Sounder DisplayScope display EnterManual Sounder Operation Automatic Sounder OperationMeasuring Depth Adjusting the gainSelecting display range Range shiftingSuppressing Low Level Noise Suppressing InterferenceWhite Marker Erasing Weak EchoesSelecting Picture Advance Speed Selecting Background and Echo ColorsBackground and echo colors Alarms Zero line Interpreting the DisplayFish school echoes Bottom echo34 Surface noise/aeration Surface noise/AerationPresentation Modes Plotter DisplaysNorth-up Course-upMini Chart Cards Selecting Chart Scale/RangeCursor Shifting the DisplayRemarks on chart display Indices and chart enlargementChart symbols Furuno mini chart cardPort service icons Nav-Charts cards Comparison of Furuno and Nav-Charts chart cardsAid to navigation data Navigation Data Display Enlarging an indicationGPS satellite monitor display How to read the compass display Steering DisplayBeacon information display How to read the XTE scale Setting the range of the XTE scaleHighway Display Fifure 3-16 Display setup1 menu Changing Operation ModeNavigation Trip Distance FishingTrack Displaying TrackTracking Changing Track Color Stopping/Restarting Plotting of TrackTrack Plotting Method, Interval Track plotting methodChanging Track Memory Capacity Track plotting intervalTrack Memory Erasing All Track Mark Entering MarksPlotter display Changing Mark Attributes Video sounder displayVideo sounder display Changing Mark Size TionsSmall Displaying Track and Mark Points Erasing MarksErasing individual marks/lines Erasing whole marks/linesEntering Waypoints WaypointsEntering waypoints at own ship’s position Entering waypoints at MOB positionChanging the shape and color of waypoint mark Waypoint menuEntering waypoints by range and bearing Changing waypoint name, comment, proximity alarm radiusEntering waypoints by latitude and longitude position Changing waypoint positionChanging Waypoint Data Erasing Individual WaypointsErasing waypoints through the waypoint list Erasing waypoints by the cursorWaypoint Mark Size Changing Waypoint Position on the Plotter DisplaySearching Waypoints This page is intentionally left blank Entering Routes RoutesEntering routes through the route list AbcdefInserting, Removing Waypoints Connecting RoutesEntering routes by the cursor Inserting waypoints through the route listRemoving waypoints from routes Inserting waypoints on the plotter displayAlph List WPTRemoving route waypoints from the plotter display Creating Track-based RoutesSave icon appearance On the plotter display Erasing RoutesThis page is intentionally left blank Navigating to Quick Points NavigationSelecting quick point entry method Navigating to a single quick pointNavigating to Waypoints waypoint list Navigating to Ports, Port ServicesNavigate route waypoints in reverse order Following a RouteNavigate directly to a route waypoint Navigate along specific leg of routeSetting speed for ETA calculation Switching waypointsRestarting navigation Cancelling Navigation This page is intentionally left blank Audio Alarm On/Off Plotter AlarmsArrival Alarm IntroductionXTE Cross Track Error Alarm Anchor Watch AlarmProximity Alarm Speed AlarmAlarm Information Alarm messagesAlarm messages and their meanings Formatting Memory Cards Saving Data to Memory Card10-1 Saving dataLoading Data from Memory Card Error message10-2 Data overwrite10-3 ConfigurationTrack Waypoint/routeThis page is intentionally left blank Chart Offset menu Chart Setup Options menuCustomizing Your Unit 11-1Chart details menu description Chart Details menuDisplay Options menu 11-211-3 Display setup1 menu description11-4 Display SETUP2 menu descriptionGPS Setup Options menu description 11.3 GPS/DGPS/TD Options menu11-5 Dgps Setup Options menu Dgps Setup Options11-6 TD Setup TD Setup menu11-7 Displaying Loran C TDsSounder Setup Options menu description Sounder Setup Options menuRange Setup soft key 11-8System Setup menu description System Setup soft key11-9 Echo Offset 200kHz, Echo Offset 50kHzSetup Nmea Port 1 menu description Configuration menuSetup NMEA/DGPS Port 2 menu description 11-10UPLOAD/DOWNLOAD Data menu 11-11XON/XOFF Download waypoint/route to PC22 Connection of GP-1650DF/GP-1650F to PC 11-1211-13 System menuSystem Menu description This page is intentionally left blank Using C-MAP NT Model Example of caution area window 12-2Objects window 12-313 Plotter display 12-4Setting Chart Setup Options 20 Depth Info display 12-621 Memory, I/O test results 12-7This page is intentionally left blank Maintenance Maintenance & TroubleshootingRecommended maintenance program 13-1Simple Troubleshooting Replacement of Fuse, BatterySimple troubleshooting plotter 13-2Simple troubleshooting sounder Error MessagesError messages 13-313-4 Diagnostic TestsMemory, I/O port test Test13-5 Keyboard testDisplay test 13-6 Clearing MemoriesMenu Tree Furuno chartSounder Setup Options Audio Alarm ON, OFF Loran C Chains Decca Chains World Time Geodetic Chart List GPS Receiver GeneralDisplay Section PlotterCoating Color Index-1 IndexIndex-2 Index-3