Furuno GP-1650DF manual Navigating to Waypoints waypoint list, Navigating to Ports, Port Services

8.2Navigating to Waypoints (waypoint list)

1.Press the [WPT/RTE] key to open the waypoint & route menu.

2.Press the soft key WAYPOINTS to open the waypoint menu.

3.Press the soft key LOCAL LIST or ALPHA/ NUMERIC LIST to show corresponding waypoint list.

4.Select a waypoint.

5.Press the soft key GO TO. The plotter dis- play appears. A light-blue line runs be- tween destination selected and own ship’s position. Arrows on the line show the di- rection to the follow. Waypoint data ap- pear at the top of screen.

8.3Navigating to Ports, Port Services

Some Nav-Charts™ mini chart cards have a port service list which shows services avail- able at ports or harbors. (See page 3-4.) You can use the list to set destination as follows:

1.Press the [MENU] key to open the main menu.

2.Press the soft key DISPLAY OPTIONS.

3.Press ▼ to select SET GO TO METHOD and press the soft key EDIT. The SET GO TO METHOD window appears.

4.Press the ▲ or ▼ to select WPT/PORT SER and press the [ENTER] key or the soft key ENTER.

5.Press the [PLOT] key to return to the plot- ter display.

6.Press the soft key GO TO. Soft key titles change as in Figure 8-2.

+	40° 45.971’N	FROM	0.26 nm	GO TO
	13° 57.462’E	OS	180.2°

QUICK

ROUTE

	NEAR
	SRVICE
PUNTA CORNACCHIA
ACCO AMENO	PORT
ISCHIA PORTO
CASAMICCIOLA
I. ISCHIA	CANCEL
DGPS 3D	GO TO

Figure 8-2 Plotter display

7.Press the soft key PORT or NEAR SRVICE soft key depending on objective. PORT shows a list of ports in your area. NEAR SRVICE displays the port service list.

SELECT PORT

sACCIAROLI ACQUAMORTA AGNONE S. NICOLA AGROPOLI AMALFI

BAIA CAPRI

CASA MICCIOLA-ISCHIA

Figure 8-3 Sample port list (southern Italy)

SELECT PORT

SERVICE

' ™

™ ™

™ ™

™™

▼

Figure 8-4 Sample port service list

8-2