Furuno GP-1650F, GP-1650DF manual 10-3, Track, Waypoint/route, Mark/line, Configuration

6.After you select all items desired, press the soft key LOAD DATA to load data. The following message appears.

NOW LOADING DATA FROM

MEMORY CARD. DO NOT

TURN OFF THE POWER UNTIL

LOADING COMPLETE.

Figure 10-8 LOAD DATA message

After loading is completed, the following message appears.

COMPLETE LOADING DATA.

PRESS "ENTER" KEY

TO CONTINUE.

Figure 10-9 COMPLETE message

7. Press the [ENTER] key.

Note on loading data

Track

Since loaded track data is added to internal track, oldest track will be entered when the track memory capacity is exceeded.

Waypoint/route

The loaded data substitutes for previously stored.

Mark/line

The loaded data is added to internal data. When the mark/line memory becomes full no marks may be entered.

Configuration

The loaded data replaces current configura- tion settings. Press the [ENTER] key to re- start. If the memory card is ejected while loading or data could not be loaded, press the [ENTER] key to restart with default set- tings. Note that track memory capacity is not saved or loaded.

10-3