Furuno GP-1650F, GP-1650DF manual 12-3, Objects window

2.Press the [ENTER] key to open the Objects window.

Objects

Tide height

Depth contour

Caution area

Depth area

Source of data

Figure 12-9 Objects window

3.Press ! or " to select Tide height.

4.Press the soft key ENTER or the [ENTER] key to open the TIDE window.

Time:	12:00	1.32
Height:	1.21 ft	1.07
Draught: 0.82 ft		0.82
01/01/00	+01	0.57
59 26. 467' N
		0.32
010 28. 646' E
		0 4 8 12	16 20 24
Port Info
HORTEN
High Water (max)		1.32 ft (13:15)
Low Water (min)		0.32 ft (21:45)
Sunrise	09:15L	Sunset	15:27L

Figure 12-10 TIDE window

5.Press the soft key DATE to open the DATE window.

DATE

DD/MM/

01 / 01 / 2000

Figure 12-11 DATE window

6.Use # or $ to position the cursor where desired and then press the appropriate numeric keys to enter a date.

7.Press the soft key ENTER or the [ENTER] key to show the tidal graph for entered date.

8.Press # or $ to locate the vertical cursor on the time desired. Time and height are shown to the left of the graph.

9.Press ! or " to shift the level cursor. Draught is shown to the left of the graph.

10.Press the soft key CANCEL to close the TIDE window.

12.4Navigating to Ports, Port Services

The C-MAP NT-FP chart provides detailed information on aids to navigation (buoy, lighthouse) and port service information that you specify with the cursor. The port service information includes the availability of water and fuel supplies, shipyards and first aid, etc. You can use the list to set destination as follows:

1.Press the [MENU] key to open the main menu.

2.Press the soft key DISPLAY OPTIONS.

3.Press " to select SET GO TO METHOD and press the soft key EDIT. The SET GO TO METHOD window appears.

SET GO TO METHOD

1 POINT

35POINT WPT/PORT SER

Figure 12-12 SET GO TO METHOD window

4.Press " to select WPT/PORT SER and press the soft key ENTER or the [ENTER] key.

5.Press the [PLOT] key once or twice to return the plotter display.

12-3