Page 12 | Axis Video Server Installation Guide |
Accessing the Axis Video Server from the Internet
Once installed, your Axis Video Server is accessible on your local network (LAN). To access the video server from the Internet, network routers must be configured to allow incoming traffic, which is usually done on a specific port. Please refer to the documentation for your router for further instructions.
For more information on this and other topics, please visit the Axis Support Web at www.axis.com/techsup
Resetting to the Factory Default Settings
This will reset all parameters, including the IP address, to the Factory Default settings:
1.Disconnect power from the Axis Video Server.
2.Press and hold the Control button and reconnect power.
3.Keep the button pressed until the Status Indicator displays yellow (this may take up to 15 seconds), then release the button.
4.When the Status indicator displays green (which can take up to 1 minute) the Axis Video Server is reset to the factory default settings.
5.
More information
For more information, please see the Axis Video Server User’s Manual, which is available on the CD included in this package. Updated versions can be obtained from www.axis.com