Toshiba SD-37VBSB Tuning the TV stations manually, Press VCR Menu, CH4, CH5, Satellite

Tuning the TV stations manually

The Auto setup function (see page 15) memorizes all broadcasts to the suit- able CH positions.

However some broadcast may not be memorized due to weak signal. In this case, use manual tuning function.

Preparation

•Turn ON the TV and set to the AV input mode.

•Press VCR to select the VCR mode. (The VCR indicator will light)

Example: Preset the BBC 2 on programme position 2.

1 Press VCR MENU.	TIMER REC SET
Press or to select the CH	AUTO REPEAT	[OFF]
TUNING. Then press ENTER.	NICAM	[AUTO]
	CH TUNING
	SYSTEM SETUP

2

3

Press (falling frequency) or

(rising frequency)

once to start the search. It stops at each broadcast automatically (" " changes to " "). Press

or repeatedly until BBC 2 appears. Only in case of receiving of the weak broadcast (drifting picture), search does not stop. If you want to stop, press or .

Press ENTER to preset. The search menu screen will disappear if the next mode is not activated in less than 50 seconds.

Press or repeatedly until 2 is displayed. (Or enter 0 2 with the Number buttons (0-9)). Then press ENTER.

￿￿EXIT￿￿￿￿	: ￿MENU￿￿￿￿	￿￿￿
SELECT :
ENTER	: ENTER
￿￿	￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿￿￿
￿￿￿￿￿￿￿￿￿￿￿￿		￿￿￿￿￿￿￿￿￿￿￿￿

CH 01	BBC 1
CH 02	BBC 2
CH 03	ITV
CH 04	CH4
CH 05	CH5
CH 06	SATELLITE

Note:

Occasionally, the auto search might catch a weak signal and stop. If the TV station signal is weak, you shouldn't store this station.

In that case restart the auto search using or .

18

4 Repeat the steps 2 and 3 to preset other TV stations.

5 Press VCR MENU repeatedly until the TV picture appears on the screen.

2J50101A [EN] P18-19 18 27/2/06, 5:39 PM