Zooming/Locating desired scene
Zooming | Locating desired scene |
This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.
1 Press ZOOM during playback.
The center part of the image will be zoomed in.
Each press of ZOOM will change the ZOOM 
1 (x 1.3), 
2 (x 1.5) and 
3 (x 2.0).
1
Use the title, chapter and time recorded on the DVD disc to locate the desired point to playback. In the case of VCD/CD discs, time and track are used to locate the desired point to playback. To check the title, chapter and time, press DISPLAY.
1 Press JUMP during playback or resume stop mode.
Jump
Title
Chapter
Time
2 Press C/D/B/A to view a different part of the frame.
You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction.
In the zoom mode, press ZOOM repeatedly to
3 return to a 1:1 view (
Off).
Notes:
•You can select the Pause, Slow or Search playback in the zoom mode.
•Some discs may not respond to zoom feature.
2 Press C or D to select the “Title/Track”, “Chapter” or “Time”.
Jump
Title
Chapter
Time
Press Number buttons (0–9) to input the
3 number.
Jump
Title
Chapter12
Time
•If you input a wrong number, press CLEAR.
•Refer to the package supplied with the disc to check the numbers.
4 Press ENTER. Playback starts.
• When you change the title, playback starts from Chapter 1 of the selected title.
• Some discs may not work in the above operation.
Notes:
•In case of the Audio CD and
•In case of the
36
2J50101A [EN] | 36 | 27/2/06, 5:40 PM |