Customizing the function settings
Setting details
DRCEMenuParental.B.L. | : OffEnglish | ||
QSoundTVSubtitleScr Seten Password:Off4:3Eng |
| h | |
lis | |||
| |||
DisplayAudioO t ut | : OEInterlaceglish | ||
Picture ModeDivX(R) :VODAuto | |||
JPEG Interval | : 5 Seconds | ||
Screen Saver | : On |
+!"#($$% |
DRC
DRC (Dynamic Range Control) enables you to control the dynamic range so as to achieve a suitable sound for your equipment.
Off:
It plays back at the recording level on the disc.
On:
Loud sound such as explosion is toned down slightly when played back. This is suitable when it is connected to a stereo.
Notes:
•This function works only during playback of Dolby Digital recorded discs.
•The level of Dynamic Range Reduction may differ depending on DVD video disc.
QSound
This DVD video player equipped with a “QSound”. It can produce the effect of being in a cinema or a concert hall.
Off: The QSound is disengaged.
On: The QSound operates.
Notes:
•The QSound setting can also be changed with AUDIO on the remote control (see page 41).
•This function works only when the disc recorded with Dolby Digital is played back.
•When this function works, the volume might changed.
•When the voice is distorted, turn off QSound.
Parental control setting
Some discs are specified is not suitable for children. Such discs can be limited not to playback with the unit.
1)Press C or D to select “Parental”, then press ENTER. “Enter Password” screen will appear.
2)Press “0000” using Number buttons
•Level Off: The parental control setting does not function.
•Level 8: Virtually all DVD software can be playedback.
•Level 1: DVD software for adults cannot be played back. Then press ENTER.
3)Press C or D to select from the level 1 to level 8. The limitation will be more severe as the level number is lower.
4)Press OPEN/CLOSE to activate Parental control setting.
Notes:
•Depending on the discs, the unit cannot limit playback.
•Some discs may not be encoded with specific rating level information though its disc jacket says “adult.” For those discs, the age restriction will not work.
•The password is required every time when you change the parental level.
•If you input a wrong number, press CLEAR.
Set the new password
1)Press C or D to select “Password”, then press ENTER. “Enter Current Password” screen will appear.
2)Press Number buttons
3)Then press ENTER. “Enter New Password” screen will appear. Press Number buttons
4)Press ENTER. Now your new password has been set. Be sure to remember this number!
52
2J50101A [EN] | 52 | 27/2/06, 5:41 PM |