
Duplicating a video tape
When you try to connect with a cable, make sure the power of both units have been turned off.
Connect the recording unit with the TV. Therefore you can just watch what the recording unit is recording.
1 Load a blank cassette tape with the erase prevention tab intact into the recording DVD/VCR. Load the previously recorded cassette tape into the playback VCR or a video camera.
VCR
2 Use AUX or CH +/– of the recording DVD/VCR to select the “L1”, “L2” or “L3” instead of the preset channel.
L1 =
L2 = VCR/DECODER Scart Socket
L3 = Front AV jacks
3 Press REC/OTR and then PAUSE/STEP of Recording unit.
4 Press
5 Press PAUSE/STEP of both units simultaneously to start the duplicating.
Note:
Before starting the duplicating process, select the proper tape speed using SP/LP. For a
Connection with second Video recorder or Video camera
| OR |
Playback unit | Playback on |
| camera |
| Recording unit |
| (not |
| supplied) |
| (not supplied) |
Press AUX on the recording unit repeatedly until L3 appears.
Duplicating a disc material onto a video tape
You can record disc material in DVD, Video CD, Audio CD, etc. onto a video tape with this DVD/VCR only.
If the DVD disc has a ” will appear on the screen for approx. 4 seconds. See page 33 for more information about the DVD playback.
Preparation:
•Load a cassette tape with the erase prevention tab intact.
•Select the tape speed in the VCR mode. (see P.25)
•Load a disc you wish to duplicate.
1 Press DVD to select the DVD mode. (The DVD indi- cator will light)
2 Press PLAY to start the disc playback.
3 During disc playback, press REC/OTR.
Notes:
•You can set the duplicating time using the OTR- function. At step 3 above press REC/OTR repeatedly until the desired duplicating time appears on the screen. (P.27)
•Only
*Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws.
32
2J50101A [EN] | 32 | 27/2/06, 5:40 PM |