Toshiba SD-37VBSB Counter Display, Zero Return function, CLOCK/COUNTER button, Press Zero Return

Counter Display

ZERO RETURN function

This function makes tape-rewinding stop at the counter 00:00:00 position automatically.

Preparation

•Turn ON the TV and set to the video input mode.

•Press VCR to select the VCR mode. (The VCR indicator will light.)

1 Press CALL.
The counter display shows the	12:00 SUN
tape running time during play-
back or recording.
The Recorder will indicate REC
during recording.

VCR

2 Press COUNTER RESET at the desired tape position. The counter display will be reset to the “00:00:00” position (e.g. the beginning of recording).

VCR

3 Press STOP when playback or recording is finished.

Press ZERO RETURN.

The tape will be rewinded or fast forwarded and automatically stop at the “00:00:00” position.

The CLOCK/COUNTER button

00:04:38 SP

12:00 SUN

00:00:00 SP

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Notes:

•When you load a video cassette, the display indication changes to "00:00".

•The counter display does not function on non-recorded (blank) sections of the tape. When you rewind, fast forward or play tapes through blank sections, the counter display stops.

Press CLOCK/COUNTER during the playback. The clock and tape counter alternate with each other in the display.

VCR

￿￿￿

Note:

You can set the tape counter to 00:00:00 with COUNTER RESET anytime. Therefore, the counter display can also indicate 00:00:00, even when the tape counter does not reach its beginning yet. Even if the tape counter indicates 00:00:00, it can be rewinded. If the tape was rewinded over the point of 00:00:00, the minus mark (–) appears in the counter display. Although the tape counter seems to forward when you press REV, in fact the tape is being rewinded. When the tape reaches the beginning, the tape-rewinding stops automatically.

23

2J50101A [EN] P20-24 23 27/2/06, 5:39 PM