Temporary cancel the rating level by DVD disc
Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not.
1 Load a DVD disc and press PLAY or OPEN/ CLOSE on the unit (see page 33).
If the DVD disc has been designed to
2 temporarily cancel the Rating level, the screen which follows the “Reading” screen will change, depending on which disc is played. If you select “YES” with the ENTER key, password input screen will then appear.
3 Enter the password with Numberbuttons (0– 9). Then press ENTER.
To exit from the entry, press
RETURN.
Note:
This temporary cancellation of rating level will be kept until the disc is ejected.
When the disc is ejected, the original rating level will be set again automatically.
4 Playback will commence if the entered password was correct.
54
2J50101A [EN] | 54 | 27/2/06, 5:41 PM |