|
|
|
|
|
|
| Recording From CDs | Recording From CDs |
|
|
|
Recording Your Own
Programme
You can record the programme you’ve created on a tape, DAT or MD. The programme can contain up to 24 tracks.
By inserting a pause during programming, you can divide the programme into two for recording on both sides of a tape.
PROGRAM |
|
|
|
Number |
|
|
|
buttons |
|
|
|
>20 |
|
|
|
CHECK |
|
|
|
· | Æ |
| P |
P | p | ||
= | + | 0 | ) |
C | c | 0 | ) |
You can automatically insert a blank space of 3 seconds between each track
Use the Auto Space function (see page 17).
You can check the total playing time while programming (Programme Edit)
This feature helps you find the last track that will fit on one side of the tape.
1Press PROGRAM on the remote. “PROGRAM” appears in the display.
2Press = or + until the track you want to programme appears in the display.
The total playing time including the selected track appears in the display and the step number of the programme flashes.
3Press PROGRAM on the remote to confirm your selection.
4Repeat Steps 2 and 3 to programme other tracks.
To check and change your programme
See page 13.
15GB