Playing CDs
Locating a Specific Track
You can quickly locate any track while playing a disc by using the =/+ (AMS: Automatic Music Sensor) buttons or the number buttons on the remote.
MUSIC SCAN
Number buttons 
>20
· |
| Æ | P | p |
= / + | = | + | 0 | ) |
| C | c | 0 | ) |
To locate | Press |
|
|
The next or | + repeatedly during playback until |
succeeding tracks | you find the track |
(AMS) |
|
|
|
The current or | = repeatedly during playback until |
preceding tracks | you find the track |
(AMS) |
|
|
|
A specific track | Number button of the track |
directly (Direct |
|
music selection) |
|
|
|
By scanning each | 1 MUSIC SCAN on the remote before |
track for 10 seconds | or during playback. |
(Music Scan) | 2 When you find the track you want, |
| press · to start playing. |
|
|
Locating a Particular Point in a Track
You can also locate a particular point in a track while playing a disc.
|
| Æ | P | p |
|
|
| = | + | 0 | ) | 0 / | ) |
C / c | C | c | 0 | ) | 0 / ) | S L O W |
To locate a point | Press |
|
|
While monitoring the | + (forward) or = (backward) |
sound | and hold down until you find the |
| point |
|
|
Slowly by | 0/) SLOW on the remote and |
monitoring the | hold down until you find the point |
sound |
|
|
|
Quickly by observing | 0/) and hold down until you |
the display in pause | find the point. You will not hear |
mode | the sound during the operation. |
|
|
Using an index (only | C /c on the remote |
for indexed discs) | repeatedly in playback or pause |
| mode until you find the point |
|
|
To directly locate tracks numbered greater than 20
Press >20 on the remote first, then the corresponding number buttons. To enter “0,” use button 10. Example: To play track number 30
Press >20 first, then 3 and 10.
You can extend the playing time during Music Scan (or in stop mode) 
Press MUSIC SCAN on the remote repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically.
Each time you press MUSIC SCAN during scanning playback, the playing time is extended by the displayed time.
You can use music scan during repeat play, shuffle play or programme play.
What is an index?
It is a number that divides a track or a disc into sections, enabling you to easily locate a desired point. You can determine if a disc uses indexes by its packaging.
Note
If “ ” appears in the display, the disc has reached the end while you were pressing. Press 0 or = to go back.
10GB