Recording From CDs
Additional Information
Adjusting the Recording Level (Peak Search) (CDP-XE500 only)
The player locates the highest level among the tracks to be recorded to let you adjust the recording level before you start recording.
Notes on CDs
On handling CDs
•To keep the disc clean, handle the disc by its edge. Do not touch the surface.
•Do not stick paper or tape on the disc.
PEAK SEARCH | p |
1Before you start playing, press PEAK SEARCH. “PEAK” flashes in the display and the player repeats the portion of the highest level.
2Adjust the recording level on the deck.
3Press p on the player to stop Peak Search. “PEAK” disappears from the display.
Note
The portion with the highest level may differ every time you try the adjustment on the same disc. The difference is, however, so slight that you won’t find any problem in adjusting the recording level precisely.
Not this way
•Do not expose the disc to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be considerable rise in temperature inside the car.
•Do not use any commercially available stabilizer. If you do, the disc and the player may be damaged.
•After playing, store the disc in its case.
On cleaning
•Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out.
•Do not use solvents such as benzine, thinner, commercially available cleaners or
14EN