Playing Tracks Repeatedly, To locate You need to

Playing CDs

Locating a Specific Track or a Particular Point in a Track

You can quickly locate any track while playing a disc using the AMS (Automatic Music Sensor) on the player or number buttons on the remote.

You can also locate a particular point in a track while playing a disc.

MUSIC SCAN	0 / )	·
(CDP-XE500 only)		≠ A M S ±

(except for CDP-XE200)

Number buttons

>10

=/ + 0 / )

To locate	You need to

The next or	Turn ≠ AMS ± clockwise until
succeeding tracks	you find the track. When using the
	remote, press + repeatedly until
	you find the track.

The current or	Turn ≠ AMS ± counterclockwise
preceding tracks	until you find the track. When using
	the remote, press = repeatedly until
	you find the track.

A specific track	Turn ≠ AMS ± until you find the
directly	track number you want appears in the
	display. When using the remote, press
	number button of the track (except for
	CDP-XE200).

By scanning each	Press MUSIC SCAN. When you find
track for 10 seconds	the track you want, press ·to start
(Music Scan) (CDP-	playing the track.
XE500 only)

A point while	) (forward) or 0 (backward) and
monitoring the sound	hold down until you find the point

A point quickly by	) (forward) or 0 (backward) and
observing the display	hold down until you find the point.
during pause	You will not hear the sound during the
	operation.

When you directly locate a track numbered over 10 when using the remote (except for CDP-XE200)

Press >10 first, then the corresponding number buttons. To enter “0,” use button 10.

Example: To play track number 30 Press >10 first, then 3 and 10.

You can extend the playing time during Music Scan

Press MUSIC SCAN repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically.

Note

If “ ” appears in the display, the disc has reached the end while you were pressing ). Press 0 or turn ≠ AMS ± counterclockwise to go back.