Sony CDP-XE500, CDP-XE200, CDP-XE300 manual Basic Operations, You need to, With the label side up

Basic Operations

Playing a CD

2 3 4

Connect the headphones.*

*CDP-XE500 only

∙See pages 4 – 5 for the hookup information.

If you turn on the player with a CD in the tray

You can start playing automatically from the beginning of the CD. If you connect a commercially available timer, you can start playing the CD at any time you want.

You can adjust the output level with the LINE OUT LEVEL +/– on the remote (CDP-XE500 and CDP-XE300 only) Z

You can adjust the headphones volume on the remote (CDP-XE500 only) Z

Connect the headphones to the PHONES jack and adjust the volume with the LINE OUT LEVEL +/– on the remote.

6EN

1	Turn on the amplifier and select the CD player position so that
	you can listen to the sound from this player.
2	Press POWER to turn on the player.
3	Press § OPEN/CLOSE,
	and place a disc on the

disc tray.

With the label side up

4 Press ·.

The disc tray closes and the player plays all the tracks once (Continuous Play).

Adjust the volume on the amplifier.

To stop playback

Press p.

To	You need to
Pause	Press P
Resume play after pause	Press	P or ·
Go to the next track	Turn ≠ AMS ± clockwise
Go back to the preceding track	Turn	≠ AMS ±
	counterclockwise
Stop play and remove the CD	Press § OPEN/CLOSE