SLEEP
CH RTN CH / VOL +/–
MUTE
TV operation
■CHANNEL UP/DOWN
Press and release CH or . The channel auto- matically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See page 21 “To memorize channels”.
■CHANNEL RETURN
This button allows you to go back to the last channel selected by pressing CH RTN. Press CH RTN again to return to the last channel you were watching.
■MUTE
Press MUTE to switch off the sound. The unit’s sound will be silenced and “MUTE” will briefly appear on the screen. The sound can be switched back on by pressing this button again or one of VOL
MUTE
■SLEEP
To set the unit to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count down 10 minutes for each press of SLEEP (120, 110, ...10, 0). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to 0.
SLEEP 120
■HEADPHONES
Insert a monaural headphones (not supplied) with a 1/ 8” mini plug into the PHONE jack on the front panel. If you connect headphones, the sound from TV speakers is muted.
Illustration of MV13Q41
TV operation
19
5S20101A | 19 | 12/16/04, 4:27 PM |