To memorize channels
This unit is equipped with a channel memory feature which allows | ||
| ||
channels to skip up or down to the next channel set into memory, |
| |
skipping over unwanted channels. Before selecting channels, they |
| |
must be programmed into the unit’s memory. In addition to normal |
| |
VHF and UHF channels, this unit can receive up to 113 cable TV |
| |
channels. To use this unit with an antenna, set the TV/CABLE |
| |
selection to the TV position. When shipped from the factory, this | ▲/▼/B/ A | |
selection is in the CABLE position. |
|
|
|
| MENU |
TV/CABLE selection | Automatic memory tuning |
| Press MENU, then press B or A to select | ||
1 option. | |||
|
| ||
2 |
| ||
| |||
| Press ▲ or ▼ to select “TV/CABLE”. |
| |
|
|
|
3 Press B or A to select “TV” or “CABLE”.
TV - VHF/UHF channels CABLE - Cable TV channels
4 Press MENU repeatedly until the menu screen is cleared.
Press ▲ or ▼ to select the “AUTO CH MEMORY”, then press A.
The TV will begin memorizing all the channels available | ||
in your area. | ||
|
|
To ADD/DELETE channels
Press ▲ or ▼ to select “ADD/DELETE”, then
1 press A. | |||
| |||
|
| ||
|
|
2 Select the desired channel to be added or deleted using Direct channel selection
▲/ ▼.
TV operation
Cable TV chart
The chart below is typical of many cable system channel allocations.
3 Press B or A to select “ADD” or “DELETE”, whichever function you want to perform.
ADD | CH 001 |
Note:
You cannot select option if you set the channel to “LINE”.
21
5S20101A | 21 | 12/16/04, 4:28 PM |