Recording
Duplicating a video tape
If you connect the unit to another VCR or Camcorder, you can |
|
duplicate a previously recorded tape. Make all connections before |
|
turning on the power. | INPUT |
STOP
REC
SPEED
Duplicating a video tape
Preparation:
•Load a cassette tape with the erase prevention tab intact.
•Load a previously recorded tape into the playback VCR or Camcorder.
1 Press SPEED to select the desired tape speed SP or SLP.
It is recommended that you set the Speed to the SP mode on the recording VCR for best results.
Connection with second video recorder
Playback VCR
To VIDEO | To AUDIO OUT |
OUT | Recording VCR |
|
2 Press INPUT to select AUDIO/VIDEO input position.
“LINE” will appear on the screen.
LINE
Audio/Video cable (not supplied)
To VIDEO IN
Illustration of
MV13Q41
To AUDIO IN
3 Press REC to start recording.
4 Press PLAY on the playback VCR or camcorder.
5 Press STOP after duplicating a video tape.
Note:
Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws.
Connection with Camcorder
Playback Camcorder | |
Recording VCR | |
| To AV Jack |
| Illustration of MV13Q41 |
To VIDEO IN | To AUDIO IN |
| Audio/Video cable (not supplied) |
For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.
36
5S20101A | 36 | 12/16/04, 4:28 PM |