One-touch Timer Recording (OTR)
The
One-touch timer recording (OTR)
CH /
STOP
REC
SPEED
Example:
1 Load a cassette tape with the erase prevention tab intact.
The unit will automatically turn on.
2 Press SPEED to select the desired tape speed SP or SLP.
The tape counter and SP or SLP will appear on the screen for about 4 seconds.
5 Press REC to begin recording. Press the button again to stop recording after 30 minutes. Each additional press of REC will increase recording time as shown below, up to a maximum of 6 hours. “OTR” will appear on the screen.
Press | Recording time | Press | Recording time |
once | NORMAL REC | 6 times | 3:00 |
twice | 0:30 | 7 times | 4:00 |
3 times | 1:00 | 8 times | 5:00 |
4 times | 1:30 | 9 times | 6:00 |
5 times | 2:00 | 10 times | NORMAL REC |
|
|
|
|
OTR 0 : 30
CH 110
Recording
|
| |||
|
|
|
| To cancel OTR |
|
|
|
| |
Set “TV” or “CABLE” option to the appropriate | ||||
3 position 21 . |
|
| Press STOP. | |
| TV | - VHF/UHF channels |
|
|
| CABLE - Cable TV channels |
| ||
|
|
|
|
|
|
|
|
|
|
4 Press Direct channel selection
“ ” will appear on screen for about 4 seconds.
CH 110
Note:
The channel cannot be changed during recording.
33
5S20101A | 33 | 12/16/04, 4:28 PM |