Playback
Cassette tape playback
To play a prerecorded tape.
Illustration of
PLAY MV13Q41
STOP/EJECT FF
REW
PLAY STOP REV FF
Playback
1 Load a prerecorded tape:
(When loading a cassette tape without the erase prevention tab, playback will start automatically).
2 To start playback:
Press PLAY on the front panel or on the remote.
on the screen for about 4 seconds.Playback will start. “ ” will appear
To stop playback:
Press STOP/EJECT once on the front panel or press STOP on the remote. The tape will stop but remain fully loaded and ready to play.
“ ” will appear on the screen for about 4 seconds.
Rewind or forward the tape
Stop the playback or recording with STOP.
To rewind the tape:
Press REW on the front panel or press REV on the remote.
To forward the tape:
Press FF on the front panel or on the
remote.
To stop the
Forward/Reverse picture search mode
When the tape is being winded, you can switch to picture search mode (see next page). To do this, press REV or
FFagain and hold it down. The unit will resume the tape winding as soon as the button is released.
Note:
This unit selects the playback tape speed SP or SLP automati- cally.
28
5S20101A | 28 | 12/16/04, 4:28 PM |