Scheduled operations
7Set what is to be operated at the time which was set in step 6.
*The settings can be established in any sequence.
The functions will differ depending on the model and system.
V.Setting the save operation
Each time the 
button (38) is pushed, the numeric display and save operation display 
change in the following sequence. Stop pushing the button when the desired save operation mode (mode 0 to 3) blinks on the display.
I. Selecting and setting operation/stop |
|
|
|
|
|
|
|
|
|
| |
Each time the | button (48) is pushed, what |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
appears on the timer function display changes in |
|
|
|
|
|
|
|
|
|
| |
the following sequence. Stop pushing the button |
|
|
|
|
|
|
|
|
|
| |
when the desired operation blinks on the display. |
|
|
|
|
|
|
|
|
| 3 | |
Mode 0 | Mode 1 | Mode 2 | Mode | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(No display) |
|
|
|
|
|
| |
|
| Operation | Operation | ||||
Operation | |||||||
continue |
| stop |
| start | |||
II.Selecting and setting the operation mode
Each time the 
button (34) is pushed, what appears on the operation mode display (1) changes in the following sequence. Stop pushing the button when the operation mode blinks on the display.
| Operation mode |
| Fan | Cooling | ||||||||
| (No display) |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Auto | Heating |
| Dry | |||||||
III.Setting the temperature
Each time the TEMP 
and 
buttons (49) are pushed, what appears on the numeric display changes in the following sequence. Stop pushing the buttons when the target temperature to be set blinks on the display.
or 
Push 
4 seconds or more
Frost protection operation
Push 
4 seconds or more
IV.Setting the restriction on the button operations
•Each time the
button (34) is pushed while the
button (43) is held down, the central control display changes from off to blinking or vice versa. To place the restriction on the button operations, ensure that the display is blinking.
*The 
button (32), 
button (34) and TEMP 
and 
buttons (49) are the buttons whose operation will be restricted by this setting. For further details, refer to the “Selecting the remote controller functions” section.
Save operation | Description | |
mode |
| |
|
| |
|
|
|
Mode 0 |
| No save operation |
|
|
|
Mode 1 |
| G |
| Save operation with 75% upper limit | |
Mode 2 |
| Save operation with 50% upper limit |
|
| |
Mode 3 |
| |
| Compressor shutdown | |
8 Push the |
| R |
button (42), and enter all the items in | ||
steps I to V above and the operation time | ||
together. |
| |
|
| |
• The display of all the setting items changes from blinking to lighted.
9 In addition: | EN | |
I. To input the settings into thePUdifferent program | ||
| ||
| ||
number for the same day of the week, repeat the |
| |
| ||
operations from step 4. |
| |
II. To move to a different day of the week and input |
| |
A |
| |
the program, repeat the operations from step 2. |
| |
| ||
10 Finally, push the button (46) to return to the |
| |
original screen. |
| |
• An underbar is displayed under.d the selected day of |
| |
the week. |
| |
o.o . |
|
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, www.toshiba.hr,
11