Toshiba RBC-AMS41E owner manual Save operations, Self-cleaning operations

Page 9

Correct operating procedures

Setting the frost protection operation

1Push the TEMP button (49) during a heating operation.

Repeatedly push the button or hold it down until “ ” appears on the numeric display.

2Now hold down the TEMP button (49) for at least 4 seconds.

When this button is pushed, what appears on the

numeric display changes from “ ” to “ ”, and the

display lights.

The frost protection operation now starts.

Releasing the frost protection operation

1Push the TEMP button (49) during the frost protection operation.

When this button is pushed, the display goes off, and what appears on the numeric display changes from “ ” to “ ”.

A normal heating operation now starts. The temperature setting is 18°C so push the TEMP button (49), and select the desired temperature setting.

Save operations

The functions will differ depending on the model and system.

During this operation, the maximum current is restricted.

*For further details, refer to the operating instructions of the air conditioner.

Initiating a save operation

1During operation, push the button (38).

The save operation where the maximum current is

restricted starts, and the save operation display lights.

2To release the save operation, push the button (38) again.

The save operation display goes off, and normal operation starts.

Self-cleaning operations

The functions will differ depending on the model and system.

When the air conditioner has stopped operating after an auto (cooling), dry or cooling operation, this function moves into action to dry out the insides of the indoor units using the fan operation so as to keep the indoor units clean.

*For further details, refer to the operating instructions of the air conditioner.

1 The self-cleaning operation starts automatically when the air conditioner was in the auto (cooling), dry or cooling mode for at least 10 minutes before its operation is shut down.

• The ON lamp goes off, the operation stop display

 

 

 

 

G

 

appears on the LCD screen, and the self-cleaning

 

operation display

lights.

 

￿￿

 

 

 

 

The duration of the self-cleaning operation differs

 

 

 

 

￿R

 

depending on the operation time prior to shutdown.

 

 

￿

 

 

Operation time prior to

Duration￿of self-

 

shutdown

 

cleaning operation

 

Under 10 minutes

 

No self￿U-cleaning

 

 

 

 

 

￿

 

 

 

operation

 

 

 

 

￿

 

 

10 or more minutes but

1 hour

 

under an hour

 

￿P

 

 

 

 

 

 

1 hour or more

 

2 hours￿

 

 

 

 

￿

 

2 To stop the self-cleaning operation, push the

 

 

 

 

￿A

 

button (32) twice in succession.

 

 

 

 

￿

The self-cleaning operation display

￿

goes off,

 

 

 

 

￿

 

and the self-cleaning operation ends.

 

 

 

 

￿d.o .o .

MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, www.toshiba.hr, e-mail: toshiba@mbfrigo.hr

8

Image 9
Contents Remote controllerP Manual del propietario Mando a distanciaBedienungsanleitung Contents Impact Safety precautionsParts and their functions Parts and their functions Setting the current day of the week and clock time Procedure for normal operation Correct operating proceduresCorrect operating procedures Symbol shown on the rightStarting the louver swing motion Save operations Self-cleaning operationsNow hold down the Temp button 49 for at least 4 seconds To release the save operation, push the button 38 againDetailed settings Grille operation procedurePush the Temp or button 49 to move the up/down grille Push the button 32 to stop the up/down grilleScheduled operations How to set up the operation programsPush the button Push ButtonScheduled operations Example of setting up an operation program Error displays Scheduled operation setup Program check operationAgain push the button Copying the program settings Push the buttonInstructions for special holidays Editing the operation programsHow to cancel the special holiday setting Timer operations Timer operationsHow to execute timer operations Push the Time and buttons 40, and select the set timeTroubleshooting Selecting the remote controller functions Selecting the functions using the DIPSwitches of the remote controller Selecting the remote controller functions