Toshiba RBC-AMS41E owner manual Scheduled operation setup Program check operation, Error displays

Scheduled operations

Scheduled operation setup

Program check operation

How to execute scheduled operations

•On the screen of the remote controller whose power has been turned on, check that the current day of the week and clock time are set accurately.

Scheduled operations cannot be executed while the

days of the week display, the day arrow and numeric display are still blinking.

•Set at least one operation program.

Check that at least one operation reservation display is indicated below the days of the week on the

remote controller screen.

1Push the button (48).

•Although first extinguished on the timer function display, the symbol shown on the right now starts blinking.

2Push the button (42) within 5 seconds of completing step 1.

•The symbol on the timer function display stops blinking and lights.

How to release a scheduled operation

1Push the button (48).

•The symbol on the timer function display changes from the lighted status to blinking.

2Push the button (41) within 5 seconds of completing step 1.

•The symbol on the timer function display stops blinking and goes off.

Error displays

•Trouble may be to blame if the ERROR display

remains lighted for 3 seconds while a scheduled operation is being executed or while a scheduled operation program is being input. Check for trouble, and remedy it.

1When the button (42) was pushed while a scheduled operation was being executed:

•The current day of the week and/or current clock time have not been set. Proceed with the clock setting operation.

•No programs have been set. Input the operation program.

•Programs are checked using the program input screen.

1 Push the button (46).

• The display transfers to the program input screen.

• The entire LCD screen blinks.

2 Push the button (45).

• Repeatedly push the button until the day arrow moves to the position above the day of the week whose program is to be checked.

3 Push the button (42).

• Enter the day of the week whose program is to be checked.

• The days of the week display and day arrow

	stop blinking and light up.			G￿￿￿R
4 Push the		button (37).
					program
	• Each time this button is pushed, the
	number and editing type are￿scrolled				forward in
				￿
	sequence on the numeric display.
	• Display the number of the program￿U				to be checked,
	and check the program’s settings.
	* Unless the			￿￿
			button (42) is pushed, the key
	operations are canceled, in which case the						EN
				￿P
	program settings will remain unchanged.
5				￿￿		button
	After completing the check, push the
	(46) to return to the original screen.
				￿A￿￿￿ ￿d.o .o .

2When the button (42) was pushed while a program was being input:

•One setting time overlaps another setting time. Change one of the setting times.

MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, www.toshiba.hr, e-mail: toshiba@mbfrigo.hr

13