Toshiba RBC-AMS41E owner manual Example of setting up an operation program

Page 13

Scheduled operations

Example of setting up an operation program

Example of program input

For program 01 for Wednesday, “7:00”, “ON”, “heating”, “25°C”, “restriction on key operation enabled”, “save operation” and “mode 1” will be set.

• Initial screen (clock setting/operation stop)

0

Push the button (46), and transfer the display to the input screen.

• On the input screen, the entire display blinks.

1

• Push the

button (45), and move the day

arrow

to the position above “WE”.

2

Push the button (42), and enter the day of the week.

The days of the week display and the day

arrow stop blinking and light up.

3

Repeatedly push the button (37), and display the number of the program which is to

contain the settings on the numeric display.

4

Push the button (42), and enter the program number.

The numeric display stops blinking and lights up.

6

I.Selecting and setting operation/stop

Push the button (48) until blinks

on the display.

II.Selecting and setting the operation mode

Push the button (34) until blinks

on the display.

III.Setting the temperature

Push the TEMP and buttons (49)

 

until “25” blinks on the numeric display.

 

IV.Setting the restriction on the button

 

 

operations

 

 

 

 

 

 

Push the

button (34) whileGholding

 

down the

button (43) until

￿

 

 

 

blinks on

 

the display.

 

 

￿￿R￿

 

 

V. Setting the save operation

 

 

 

 

 

Push the

button (38) until

 

blinks

 

on the display.

 

 

￿￿U￿P￿￿￿￿

 

7

 

 

 

 

 

 

 

Push the

button (42) to enter the operation

 

settings.

 

 

 

￿A

 

 

 

 

 

 

 

 

• With the exception of

 

, all the displays

 

stop blinking and light up.

 

 

 

 

8

 

 

button (46) o.o.￿d￿￿￿is pushed,

Finally, when the

 

 

 

 

 

.

 

 

goes off, and the original screen is

 

restored.

 

 

 

 

 

 

9

An underbar is displayed under the selected day of the week.

5

Push the TIME and buttons (40), and set the operation time.

If the buttons are held down for four or more seconds, the time can be moved forward or

back in 10-minute increments.

MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, www.toshiba.hr, e-mail: toshiba@mbfrigo.hr

12

Image 13
Contents Manual del propietario Mando a distancia Remote controllerPBedienungsanleitung Contents Impact Safety precautionsParts and their functions Parts and their functions Setting the current day of the week and clock time Procedure for normal operation Correct operating proceduresSymbol shown on the right Correct operating proceduresStarting the louver swing motion Save operations Self-cleaning operationsNow hold down the Temp button 49 for at least 4 seconds To release the save operation, push the button 38 againDetailed settings Grille operation procedurePush the Temp or button 49 to move the up/down grille Push the button 32 to stop the up/down grilleScheduled operations How to set up the operation programsPush the button Push ButtonScheduled operations Example of setting up an operation program Error displays Scheduled operation setup Program check operationAgain push the button Copying the program settings Push the buttonInstructions for special holidays Editing the operation programsHow to cancel the special holiday setting Timer operations Timer operationsHow to execute timer operations Push the Time and buttons 40, and select the set timeTroubleshooting Selecting the functions using the DIP Selecting the remote controller functionsSwitches of the remote controller Selecting the remote controller functions