Parts and their functions
28 Operation reservation |
|
| 30 Special holiday |
| |||
This appears for the days of the week on which | This appears for a day of the week which has been | ||
programs have been set. | set as a special holiday. | ||
29 Days of the week display | 31 Day arrow | ||
|
|
| This indicates the current day of the week or day on |
|
|
| which a program is set. |
Button operation area
49
48
47
46
45
44 43 42
32 ON/OFF button
Shortly after this button is pushed, operation starts, and operation stops shortly after the button is pushed again.
33 FAN button
Use this to select the desired air speed mode.
34 MODE button
Use this to select the desired operation mode.
35 VENT button
Use this when a ventilation fan or other unit, purchased on the market, has been connected.
36 LOUVER button
Use this to select the louvers when setting the air direction for each louver or when fixing the louvers in place.
37 UNIT button
Use this to select the indoor unit to be operated when operating a multiple number of indoor units using one remote controller.
38 SAVE button
Use this when performing save operations.
39 SWING/FIX button
Use this to select the desired air direction or swing operation.
40 TIME buttons
Use this to set the clock or adjust the time when the operating time is set.
41 CL button
Use this when clearing the setting of the program (for a scheduled operation or timer operation) which is being set.
5032
34
35
36
|
|
| 37 | GR U |
41 | 40 | 39 | 38 | |
| 42 SET button | |||
|
|
|
| |
|
| Use this when entering the settings of the program | ||
|
| (for a scheduled operation or timer operation) which | ||
|
| is being set. | PA | |
| 43 TEST button | |||
|
| Use this for servicing. | ||
|
| * This button is not normally used. | ||
| 44 FLT.RESET button | |||
|
|
|
| |
|
| Use this to reset (extinguish) the filter display. | ||
| 45 DAY button | d. | ||
|
|
|
| |
|
| Use this to select the targeted day of the week when | ||
|
| setting the clock or setting a program. | o.o | |
|
|
|
|
Use this when starting and ending the program .
settings for scheduled operations.
47 Grille button
Use this to raise or lower the grille.
48 SCHEDULE button
Use this when executing or releasing scheduled operations or when selecting ON or OFF for timer operations.
49 TEMP buttons
Push and to set the temperature to the desired value.
*These buttons are also used to raise or lower the grille when the grille function is used.
50 ON lamp
This lights during operation. It blinks when trouble has occurred or when a protection operation is performed.
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, www.toshiba.hr,
4