Toshiba RD-XV48DTKF Connecting to a TV with an Hdmi Compatible Port, Actual Output Modes by Media

Page 21

E3NG0FD_EN.book Page 21 Wednesday, January 30, 2008 10:37 AM

Selecting Progressive Scan (576p/480p or Interlaced 576i/480i) Playback

•If your TV is compatible with progressive scanning (576p/480p), connect the TV to the COMPONENT VIDEO OUT jacks of this unit and set “Video Out” setting to “Component (Progressive)” in “Setup” menu (See page 90.). Next, set your TV to the progressive scan mode.

•If your TV is not compatible with progressive scan, set “Video Out” setting to “Component (Interlace)”.

•Use a commercially available adaptor if the Video input jacks of your TVs or monitors are the BNC type.

•Only component and HDMI connections are compatible with the Progressive Scan.

Connecting to a TV with an HDMI Compatible Port

[HDMI CONNECTION]

A simple 1-cable connection with a device having an HDMI (high-definition multimedia interface) connector allows digital transfer of both digital video signals and multi-channel audio signals. This is the best method to connect this unit. It can minimise the deterioration of image quality.

Use the HDMI cable (commercially available) for connection.

Connect the HDMI output jack of this unit to the HDMI input jack of TV.

HDMI cable (not supplied)

Introduction Connections Basic

HDMI OUT

this unit

To HDMI input jack

HDMI IN

TV

Setup Recording

Selecting HDMI mode

Press [HDMI] to select the HDMI output mode. The output mode changes as follows every time [HDMI] is pressed. 576p (PAL) / 480p (NTSC) J 720p J 1080i

J1080p (An HDMI mode that is not supported by the display device will be skipped.)

Actual Output Modes by Media

Audio recording format

Dolby Digital /

 

DTS / MPEG

Actual output

of the disc

 

 

setting of this unit

 

 

 

 

 

 

 

 

 

Dolby

PCM

2channel PCM

 

Digital

Stream

Dolby Digital

 

 

 

 

 

LPCM

PCM

2channel PCM

 

 

DVD-video

Stream

 

 

 

 

 

DTS

ON

DTS

 

 

 

 

 

OFF

-

 

 

 

 

 

 

 

MPEG

PCM

2channel PCM

 

 

 

 

Stream

MPEG

 

 

 

 

 

 

 

Dolby

PCM

2channel PCM

 

Digital

Stream

Dolby Digital

 

 

 

 

DivX®

MP3

PCM

2channel PCM

 

Stream

 

 

 

 

 

 

 

 

MP2

PCM

2channel PCM

 

 

 

 

Stream

MPEG

 

 

 

 

 

 

For Audio CD, Video CD and MP3 files, 2 channel PCM will be output regardless of the “Dolby Digital” setting.

If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select “Stream” in “Dolby Digital” setting.

(See page 87.)

EN 21

PlaybackEditing Function Setup VHS Functions Others

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 1VMN24753 / E3NG0FD RD-XV48DTKFPrecautions Laser SafetyPower Supply Avoid the Hazards of Electrical Shock and Fire Installation LocationMoisture Condensation Warning About CopyrightEU Conformity Statement MaintenanceMay need to be cleaned Accessories SuppliedTable of Contents Recording FeaturesDubbing PlaybackEditing Symbols for Tuner SettingCompatibility OthersDVD-RW DVD+RW HDD Unplayable Discs 10 ENColour Systems Region CodesFront Panel Functional OverviewRear Panel 12 ENThis unit does not have an RF modulator Remote Control Installing Batteries in the Remote Control About the Remote Control14 EN Switching HDD / DVD / VHS mode Guide to On-Screen DisplaysDisplay Menu 16 EN Info MenuTitle / File Name Information MP3 Tag InformationMain Menu 18 EN Display Messages Front Panel Display GuideTitle / Track and Chapter number Current status of the unitConnecting to a TV Connections20 EN Connecting to a TV with an Hdmi Compatible Port Selecting Hdmi modeActual Output Modes by Media 22 EN Connecting to an External EquipmentAV3 Front Copyright protection systemDigital Audio for Better Sound Quality Connecting to an MD deck or DAT deckAfter You Have Completed Connections Connections illustrated above are optional for better soundInitial Setting 24 ENPress Enter to exit Auto Tuning DVB & Analog Channel Setting26 EN Manual Tuning AnalogChannel Plan CH Indication TV Channel BG PAL-B/G Channel Plan CH IndicationMove Auto Tuning DVBYou can replace two channels To move another channel, repeat steps 5 toCountry Setting Manual Tuning DVBPress Setup to activate the setting Select a ChannelQuick Select Edit Channels DVBPress Enter while watching a DVB channel Skip Channels Edit Group ListsAdult Lock Delete ChannelsEdit the name using the Number buttons Signal InformationAfter completion, press Enter Press Setup to exit Channel MoveTV View Operation Selecting the Audio ModeSelecting the TV Aspect Ratio Digital Teletext ReceptionMultiaudio SubtitlePincode Setting for Adult Lock DVB Menu SettingLanguage Setting Maturity LockSelecting the On-Screen Display OSD LanguageAbout Auto Clock Setting Setting the ClockManual Clock Setting 36 ENInformation on DVD Recording Recording ModeType of Discs Restrictions on RecordingAbout HDD Making Discs Playable in Other DVD Players FinaliseMaximum Recordable Numbers of Title / Chapters 38 ENFormatting a Disc Choosing the Recording Format of a Blank DVD-RW DiscMake Recording Compatible Setting Auto Chapter Setting Aspect Ratio for Video Mode RecordingYou can set aspect ratio for video mode recording 40 ENSetting External Input Audio Selecting the Sound ModeSelect Yes using U \ D, then press Enter Select Stereo or Bilingual using U \ D, then press EnterSetting Bilingual Recording Audio Recording Audio Select XP42 EN Basic Recording Press B ON\STANDBY to turn on the unitPress Stop C to stop the recording One-touch Timer Recording OTR Timer Recording44 EN Refer to Recording Mode on Press Enter when all information required is enteredTo record from the external input, select AV1, AV2, or AV3 Alternate recording DVD onlyStop the Timer Recording in Progress Skip the Periodical Timer RecordingIf the Timer Programming Did Not Complete Correctly VPS Video Programme System / PDC Programme Delivery ControlHints for the Timer Recording Error numbers indicateE49-E50 Timer Recording EPG 48 ENWhile viewing a DVB programme, press Guide Satellite Link Preparation of this unitAre given below Example Video Colour System Settings for External EquipmentRecording from External Equipment 50 ENGuide to DV and On-Screen Display Information on DV DubbingDVC to HDD / DVD Dubbing Select DV channel using Input Select F or PROG. G \ H52 EN To stop dubbingRecording Mode for Dubbing Information on DubbingGuide to Dubbing Menu Display One Touch Dubbing Before Starting Dubbing54 EN One Touch Dubbing between HDD and DVDOne-Title Dubbing between HDD To delete a title 56 ENTo move a title To erase all the titles in the dubbing title listSelect DVD a VCR using U \ D Then press Enter Select HDD a VCR using U \ D Then press EnterSelect Add using U \ D, then Press Enter Select a desired title using \ D \ L \ P, then press EnterTo cancel the disc protect Setting a Disc to Protect58 EN HDD a VCRFinalising Discs To cancel finalising DVD-RW disc onlyAuto Finalise Finalising is completeBasic Playback Select Play From Start using U \ D, then press EnterHint for HDD / DVD Playback Playing Back a DVD-V / Video CD without PBC FunctionPlaying Back a DivX Playing Back an Audio CD, MP3 orDivX Subtitle 62 ENDivX VOD After the DivX file is selected, Subtitle List will appear720 x 480 @30 fps Select an item using U \ D \ L \ P, then press Enter Playing Back Discs Using the Disc Menu64 EN Press Disc MenuPlaying Back a Video CD Using Playing Back a Disc Using the Title MenuPBC Function for Video CDs Title MenuSpecial Playback Cancelling and Recalling the PBC FunctionResume Playback 66 ENVariable Skip / Variable Replay Fast Forward / Fast ReversePause Rapid PlaybackSlow Forward Slow Reverse Playback Step by Step PlaybackZoom 68 ENChasing Playback during Recording Marker SetupSimultaneous Playback Recording SearchTitle / Chapter Search 70 ENUsing U \ D or Number buttons, then press Using the Display buttonTrack Search Direct SearchRepeat Playback Repeat / Random / Programme Playback / Slide ShowRandom Playback Programme PlaybackSwitching Audio Soundtrack Switching SubtitlesSelecting the Format of Audio and Video Slide ShowSwitching Camera Angles Switching Virtual Surround SystemSelect OFF, Type 1 or Type 2 using U \ D, then press Enter Reducing Block NoiseEditing Discs Guide to a Title ListWhat Original or Playlist is for? Press Return to exit the title list76 EN Deleting TitlesEditing Title Name Deleting Selected TitlesAdding or Deleting Chapter Markers Manually Guide to Editing Title Names78 EN Press Return and then Return or Stop C to exitHiding Chapters Select the desired interval using U \ D, then press EnterPress Return again and then Return or Stop C to exit This operation may take awhile to be completedProtecting Titles Select Hidden using U \ D, then press EnterDividing a Title 80 ENAdding Titles to a Playlist Combining TitlesDeleting Parts of Titles Deleting All Playlists82 EN All Playlists can be deleted if it is no longer neededDeleting All Titles in HDD Select Delete using U \ D, then press EnterPart of the title is deleted Press Stop C if you are playing back a disc84 EN Function SetupSetup Items highlight is the default Contents Playback Parental Lock Default All DVD only86 EN Audio OutDisc Menu Language Default French DVD only Audio Language Default Original DVD onlySelect a setting using U \ D, then press Enter 88 EN Screen Saver Default 10 minutes OSD Language Default FrançaisFL Dimmer Default Bright DisplayVideo Out Default Scart RGB TV Aspect Default 169 WideVideo 90 ENFormat Default RGB DivX Subtitle Default OFFHdmi Audio Default on Select Hdmi using U \ D, then press EnterReset All RGB Range Default Normal92 EN Basic Recording Recording and One-touch Timer Recording OTRDVC to VHS Dubbing One-touch Timer RecordingIndex Search 94 ENOther Operations Changing the Video Colour SystemHi-Fi Stereo Sound System 96 EN TroubleshootingChannel 98 EN Playback Editing Remote ControlError message Cause Solution 100 EN Error messageEN101 Language Code102 EN GlossaryEN103 Specifications
Top Page Image Contents