Toshiba RD-XV48DTKF owner manual Connecting to an External Equipment, 22 EN, AV3 Front

E3NG0FD_EN.book Page 22 Wednesday, January 30, 2008 10:37 AM

Copyright protection system

To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display device (or an AV amplifier) support a copyright protection system called HDCP (high- bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device (or AV amplifier) for more information.

* HDMI: High Definition Multimedia Interface

Note

•Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate properly with this unit.

•When using an HDCP-incompatible display device, the image will not be viewed properly.

•Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, this unit cannot be controlled by another device via the HDMI connector.

•The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length) may be limited by the device that is connected.

•Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with device such as this unit, audio signals are not output from the HDMI output connector.

•When this unit’s HDMI connector is connected to a DVI-Dcompatible monitor (HDCP compatible) with an HDMI-DVIconversion cable, the signals are output in digital RGB.

•If the connected equipment is not compatible with HDMI BITSTREAM, DTS sound will not be output.

•When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur.

Please check and set the HDMI setting again.

Connecting to an External Equipment

This unit has three input terminals which can be selected using [INPUT SELECT F] on the remote control, AV1 or AV2 on the rear panel and AV3 on the front panel. Be sure that all the units are switched off before making connections.

Recording from a DVD player, Satellite Box or other Audio-Video equipment with a Scart output socket (AV2)

AV output jack (Scart)

Scart cable (not supplied)

AV2 (DECODER)

HDMI OUT

Note

•When you record a TV programme from a Satellite Box, you must connect a Scart cable to AV2 (DECODER). (See page 49.)

•When AV2 is connected, the signal from the AV2 will be output automatically. If you want to monitor the signal from other input, you must press [DISPLAY] first. Then, select the desired input to monitor with [INPUT SELECT F].

Recording from a camcorder or other Audio-Video equipment with no Scart output socket (AV3)

Connect to AUDIO / VIDEO input jacks on the front panel using an RCA Audio/Video cables.

When connecting a DV-camcorder, use DV input jack of AV4 (Front).

AV3 (Front)

			SELECT		HDD/DVD
BBING		VCR	HDD	DVD	REC
R	DVD				HDD DVD
D	DVD

Video cable

(not supplied)

Audio cable

(not supplied)

DV cable (4-pin)

(not supplied)

VIDEO OUT AUDIO OUT DV OUT

Note

•When connecting an external device of monaural output to this unit, use AUDIO L jack of AV3.

22 EN