Toshiba RD-XV48DTKF owner manual Information on Dubbing, Guide to Dubbing Menu Display

E3NG0FD_EN.book Page 53 Wednesday, January 30, 2008 10:37 AM

Information on Dubbing

You can copy an HDD / DVD disc to a videotape or copy a videotape to an HDD / DVD disc. This function will be possible only if the DVD or the videotape is not copy protected.

Before dubbing, prepare for the recording on the DVD- RW / R disc, DVD+RW / +R disc or the videotape. See pages 37 to 38 (HDD / DVD) or page 93 (VHS).

Difference between “Copy” and “Move”:

Copy : After dubbing the programme, the original programme will remain.

Move: After dubbing the programme, the original programme will not remain.

Available dubbing direction for copy-once programme:

From	To
	DVD-RW (VR)	◯*1,*2
	(CPRM-compatible)
	DVD-RW (VR)	×
HDD	(Not CPRM-compatible)
(Internal)	DVD-RW (Video)	×
	DVD-R / +RW / +R	×
	Videotape	◯*2
DVD-RW	HDD (Internal)	×
(VR)	Videotape	◯*2
	HDD (Internal)	◯
	DVD-RW (VR)	◯*2
	(CPRM-compatible)
Videotape
	DVD-RW (VR)	×
	(Not CPRM-compatible)
	DVD-R / +RW / +R	×
◯: Available
×: Not available

*1 The programme (recorded) moves. (It will be deleted from HDD.)

*2 You cannot dub the recorded programme to HDD or DVD-RW again. (Copy control signal will be recorded to the videotape.) (Refer to page 37 for details about CPRM.)

Guide to Dubbing Menu Display

1	HDD	DVD
		3000 MB	3
		Dubbing List
2	Add
	Delete All		4
	Dubbing Start
		1/1	5

1Dubbing direction

2Dubbing menu

3Remaining recordable space

4Dubbing list

5Current page number / total number of pages

Recording Mode for Dubbing

“High”

This unit is compatible with the high speed dubbing from HDD to DVD or VR mode DVD-RW disc to HDD. With the high speed dubbing, you can dub a title much faster than the normal speed dubbing without changing the quality of the picture and sound. (e.g. If you dub a title recorded in SLP mode to DVD-R or DVD+R, dubbing speed will be 32 times faster than the normal dubbing speed.) To perform the high speed dubbing, set the recording mode to “High”.

•Duration of high speed dubbing will vary depending on the recording mode or the title amount.

•High speed dubbing is not available when;

-recording mode is set to other than “High”.

-dubbing from a video mode DVD-RW/-R or DVD+RW/+R disc to the HDD.

-there is not enough space in the disc.

-dubbing a title recorded in EP or SLP mode to DVD+RW / +R discs.

•High speed dubbing of an HDD title which has bilingual audio is only available to VR mode DVD-RW disc.

“Auto”

When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and selects the best recording mode available automatically.

•The recording may be cut short when the available recording space of the disc is too limited.

Note

•During normal dubbing, you can watch the playback picture of the title being dubbed (the audio cannot be changed). During high speed dubbing, the playback picture will not appear.

•When you dub an HDD title that has bilingual audio to Video mode DVD-RW / -R or DVD+RW / +R disc, select an appropriate audio format in the “Bilingual Recording Audio” menu. Refer to “Setting Bilingual Recording Audio” on page 42.

•In order to dub a DVD recorded with the NTSC, set the “TV System” to “PAL”. Refer to “9. TV System” on page 88.

•If you stop the dubbing halfway, the contents will be dubbed up to where you stop the dubbing (except for the high speed dubbing). With high speed dubbing, nothing will be dubbed if you stop it halfway.

•To stop the dubbing in progress, press [C STOP] on the front panel or press [STOP C] for 2 seconds on the remote control. If you stop the high speed dubbing or stop the dubbing copy-once programmes, confirmation message appears. Select “Yes” using [U \ D], then press [ENTER] to proceed.

Other recording modes

Refer to page 37 for the information on other recording modes.

EN 53

Introduction Connections Basic Setup Recording PlaybackEditing Function Setup VHS Functions Others