Toshiba RD-XV48DTKF owner manual Settings for External Equipment, Video Colour System, 50 EN

Note

• During recording, recording will be paused when a signal other than PAL or SECAM is detected. (See “Video Colour System” on this page for details.)

• If the external equipment is connected to AV2, the picture of the external equipment will be output except during the DVD playback of this unit. Turn off the external equipment or press [DISPLAY] to output the picture of this unit.

Press [C STOP] (HDD/DVD) or

[A / C EJECT/STOP] (VHS) on the unit to stop recording.

Select a recording mode using [REC MODE]. (See page 37.)

3

4 Press [I REC] on the unit to start recording.

5 Press the [PLAY] button on the external equipment.

6

2 Select the input terminal to which the external equipment is connected (AV1, AV2, or AV3).

To use the input jacks on the rear of the unit, select “AV1” or “AV2” position by pressing [INPUT SELECT F] or [PROG. G \ H]. To use the input jacks on the front of this unit, select “AV3” position by pressing

[INPUT SELECT F] or [PROG. G \ H].

Select “Recording” using [U \ D], then press [ENTER].

Select “Video Colour System” using [U \ D], then press [ENTER].

Before recording from external equipment, see page 22 for connection instructions.

1 Turn the TV and the unit on, and select the input of the TV to which the unit is connected.

If you are recording to the HDD, press [HDD]. If you are recording to a disc, press [DVD] and insert a recordable disc.

If you are recording to a videotape, press [VCR] and insert a recordable videotape.

E3NG0FD_EN.book Page 50 Wednesday, January 30, 2008 10:37 AM

Settings for External Equipment

Video Colour System

When you record from external equipment or copy a videotape to a DVD disc, you can set the format Auto, PAL or SECAM.

Recording from External Equipment

Video	VR
HDD DVD-RW	DVD-RW DVD-R

DVD+RW DVD+R VHS

1 In stop mode, press [SETUP]. Select “General Setting” using [U \ D], then press [ENTER].

2

3

4 Select “Auto”, “PAL” or “SECAM” using [U \ D], then press [ENTER].

General Setting

Playback
Display				Auto Chapter
Video				Recording Audio Select (XP)
Recording	Video		ColourA toSystemFinalise
Clock
		Auto		Aspect Ratio (Video mode)
Channel		PAL		Compatible
DivX				Bilingual Recording Audio
HDMI		SECAM
				External Input Audio
Reset All
				Video Colour System

		The video colour system will be set
Auto	: automatically according to the
		recording material.
PAL	:	The video colour system will be set to
		PAL.
SECAM:		The video colour system will be set to
		SECAM.

5 Press [SETUP] to exit.

Note

•During recording, when a signal other than PAL or SECAM is detected, an error message appears on the screen and recording will be paused. Recording will be resumed when a PAL or SECAM signal is detected.

50 EN