Toshiba RD-XV48DTKF owner manual Move, Auto Tuning DVB, You can replace two channels

E3NG0FD_EN.book Page 27 Wednesday, January 30, 2008 10:37 AM

Move

ANALOG

You can replace two channels.

1 In stop mode, press [SETUP]. Select “General Setting” using [U \ D], then press [ENTER].

2 Select “Channel” using [U \ D], then press [ENTER].

3 Select “ANALOG Channel Setup” using [U \ D], then press [ENTER].

4 Select “Move” using [U \ D], then press [ENTER].

5 Select the position number of which you want to change the channel using [U \ D], then press [ENTER].

You cannot select a position number where “– – –”appears next to the number, because “Skip” is set to “ON” for that position number.

6 Move the channel to another position

number using [U \ D], then press [ENTER].

• To move another channel, repeat steps 5 to 6.

7 Press [SETUP] to exit.

Auto Tuning (DVB)

DVB

You can programme the tuner to scan only the DVB channels that you can receive in your area.

1 In stop mode, press [SETUP]. Select “General Setting” using [U \ D], then press [ENTER].

2 Select “Channel” using [U \ D], then press [ENTER].

3 Select “DVB Channel Setup” using [U \ D], then press [ENTER].

4 Select “Auto Tuning” using [U \ D], then press [ENTER].

The unit will start storing channels available in your area.

DVB Channel Setup

Edit Channels

Auto Tuning

Manual Tuning

Signal Information

The tuner scans and memorises all the active DVB channels (TV / Radio) in your area.

	Channel search
S. No. TV channel		S. No. Radio channel
1	ITV1	700	BBC Radio 1
2	ITV2	701	BBC Radio 2
3	Channel	702	Magic Radio
4	E4	703	Classic FM
Channel48 UHF		690000kHz/8M

Progress 60%

•Press [ENTER] after Auto Tuning is completed, then the lowest memorised DVB channel appears on the screen.

5 Press [SETUP] to exit.

You can use [PROG. G \ H] for the memorised DVB channels.

Note

•If you press [RETURN] during the scanning, the screen will return to the previous displayed menu, and Auto Tuning will be cancelled.

•If you press [SETUP] during the scanning, this operation will stop and the lowest memorised DVB channel will appear on the TV screen.

EN 27

Introduction Connections Basic Setup Recording PlaybackEditing Function Setup VHS Functions Others