Toshiba RD-XV48DTKF owner manual Hints for the Timer Recording, Error numbers indicate, E49-E50

E3NG0FD_EN.book Page 47 Wednesday, January 30, 2008 10:37 AM

The error numbers indicate:

E1–E22,

E37–E39 : Recording error

E23–E24 : Unrecordable disc

E25/E51 : • Copy prohibited programme

:• Cannot record because of the NTSC

/PAL-60signal is received.

E26–E28	: Copy prohibited programme
E29	: Disc protected
E30	: Disc full
E31	: Already recorded 99 titles (Video
	mode)
E32	: Already recorded 99 titles (VR mode)
E33	: Already recorded 999 chapters
E34	: No space for Control Information
E35	: PCA (Power Calibration Area) full
E36	: Already finalised Video format disc
E40	: • There are some unrecorded parts
	due the overlapped timer
	programmes.
	: • Recording did not start at the start
	time.
E41	: Power failure
E42	: No disc
E43	: Already 49 titles recorded
	(+VR mode)
E44	: Already 254 chapters recorded
	(+VR mode)
E45	: Copy prohibited programme
E46	: It is impossible to record additionally
	on a disc recorded by other units
	when setting “Make Recording
	Compatible” to “OFF”. (+VR mode)
E47	: Already 600 titles recorded on the
	HDD.
E49–E50	: HDD recording is cancelled due to the
	insufficiency of the disc space on the
	HDD.

•Timer programme with an error number will be cleared once the entry screen for the programme is displayed.

Hints for the Timer Recording

•If there is a power failure or the unit is unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.

•If a disc is not inserted or if a inserted disc is not recordable (finalised DVD-RW/-R, finalised DVD+R, a fully recorded disc, etc.), the unit will perform the alternate recording to the HDD. (See page 45.)

•When a timer recording is completed, the unit will ask you whether to turn off the unit if there is no timer recording which starts within 4 minutes, except under conditions listed below.

-During playback of HDD or DVD.

-While displaying menus or information on the screen.

•The unit will be turned off automatically if you select “Yes” or if you do not reply in 1 minute.

•When the programmed starting and ending time are earlier than the current time, the setting will not be accepted.

•The audio language which is selected in the “DVB Menu” will be recorded for the timer recording of digital TV broadcasting.

•Timer recording whose recording time exceeds 12 hours cannot be made.

•It is prohibited to turn off the unit from 4 minutes before the programmed starting time.

•It is prohibited to change channel from 15 seconds before the programmed starting time.

•[REC I] does not work from 2 minutes before the programmed starting time. If it comes to 2 minutes before the starting time during regular or one-touch timer recording, the recording in progress will be stopped.

•Playback of DVD/CD is prohibited from 2 minutes before the programmed starting time when the recording media is DVD. If it comes to 2 minutes before the programmed starting time during DVD/ CD playback, the playback will be stopped.

•When 2 or more programmes are overlapped, “Timer programme overlapped” appears, and the overlapped programme will be displayed in blue. To correct the timer programme refer to “Checking, Cancelling or Correcting the Timer Programming Information” on page 46.

•If the Start time is earlier and the End time is later than the current time, the recording will start immediately after you press [ENTER] at step 9 on page 45.

Introduction Connections Basic Setup Recording PlaybackEditing Function Setup VHS Functions Others

EN 47