Toshiba RD-XV48DTKF owner manual Information on DV Dubbing, Guide to DV and On-Screen Display

E3NG0FD_EN.book Page 51 Wednesday, January 30, 2008 10:37 AM

Information on DV Dubbing

This function helps you to dub the contents in the DVC (digital video camcorder) to HDD, DVD or VHS easily. (See page 94 for “DVC to VHS Dubbing”.) You can control basic operations of the DVC from the remote control of this unit if the DVC is in video mode.

Guide to DV and On-Screen Display

1 Connect your DVC to the DV input jack on the front panel using a DV cable. (Use the DV cable that has 4- pin input jack and is compliance with the IEEE 1394 standards.)

2 Press [INPUT SELECT F] repeatedly to select the appropriate external input channel for DV input jack (AV4).

3 Press [DISPLAY] to display the DVC information on the screen.

When the DVC is in video mode...

		T	1/ 1	C	1/ 1
1						-RW	VR	ORG
2
	Control				DVD		DV
	DV Audio				Stereo1		AB-1234
	Start Rec						0:12:34

DVD SP 2:00

3 4

When the DVC is in camera mode...

T 1/ 1 C 1/ 1

-RW VR ORG

DV 5 AB-1234

0:12:34

DVD SP 2:00

76

The menu changes according to the mode of DVC. Switch the mode on the DVC to video mode for the dubbing information.

The following instructions are described with the operations using the remote control of this unit.

1DV icon

2Indicator of active device

•With “Control” highlighted, press [ENTER] to display the available devices to control with the

remote control of this unit. Select the device you want to operate using [U \ D], then press

[ENTER].

-Select “HDD” / “DVD” to control this unit with the remote control of this unit.

-Select “DVC” to control your DVC with the remote control of this unit.

3Recording audio mode

•“DV Audio” can be changed. With “DV Audio” selected, press [ENTER] to display “DV Audio”

menu. Select the audio you want to output using [U \ D], then press [ENTER].

-Select “Stereo1” to dub the stereo sound.

-Select “Stereo2” to dub the sound that was added after the recording.

-Select “Mix” to dub the stereo1 and stereo2.

4 Command menu

• “Start Rec” or “Pause Rec” will appear.

5 External input channel

6 Product name of your DVC

• If the unit cannot recognise the input signal from the DVC or if it is the unknown product,

“No Device” or “****” will appear instead.

7 Status of the current operation and the time counter

Each icon means (Available icons may vary depending on the DVC):

DVC is in stop mode.

DVC is in playback mode.

DVC is in pause mode.

DVC is fast forwarding. (standard speed)

DVC is fast forwarding. (faster than above)

DVC is fast forwarding. (faster than above)

DVC is slow forwarding. (standard speed)

DVC is slow forwarding. (faster than above)

DVC is slow forwarding. (faster than above) DVC is fast forwarding. (in stop mode)

DVC is fast reversing. (in stop mode)

DVC is fast reversing. (standard speed)

DVC is fast reversing. (faster than above)

DVC is fast reversing. (faster than above)

DVC is in slow reverse playback.

DVC is in recording.

DVC is in recording pause mode.

Please also read the operating instructions of your DVC for more information.

EN 51

Introduction Connections Basic Setup Recording PlaybackEditing Function Setup VHS Functions Others