Toshiba Official Manual for 55G300U and 46G300U: Features and Settings

Using the Doihy® DigRal Dynamic

Range Control feature

This dynamic range control feature causes the ATSC

dynamic range to be further compressed, allowing

you to switch from ATSC to analog broadcasts at the same dynamic range.

To use tile Dolby Digital Dynamic Range Control:

MENU

IPress O and open the Sound menu.

2Highlight AUdiO Setup and press @.

3[n the DoJby Digital DynamicRangeControlfield,

select CompressedWhen. Standardis selected,

the audio is output with minimal compression.

4To save the new settings, highlight Done and press @.

To revert to the factory defaults, highlight Reset and press @.

No te:

°This item will be grayed out for NTSC signals, Video, ColorStream, and PC inputs.

°The Dolby Digital Dynamic Range Control will function in relation to Optical Output Format (PCM mode).

Using the Locks menu

The Locks menu includes the Enable Rating

Blocking, Edit Rating Limits, Input Lock, Front

(Control) Panel Lock, GameTimer, and New PIN Code features. You can use these features after

entering the correct PIN code.

Enteringthe PiN code

MENU. .

IPress 0 and h@fl@at the Locks menu icon.

Press V, which displays the PIN code entry screen.

*The Lock System screen (below) aF_pears if a

48

PIN code has not been stored. Press the Channel

Number buttons to enter a new four-digit code, enter the code a second time to confirm, and

press @.

•The Locks/Activescreen appears if the PIN code is already stored. Use the Number buttons to

enter your four-digit code and press @.

If the wrong PIN code is entered, the message

"Incorrect PIN code, please try again!" appears.

Highlight Retry and press @. Enter the code again and press @.

When the correct PIN code is entered, the Locks menu opens.

Note:

PiN code can not be set to "0000".

if you cannot remember your PiN code

While the PIN code entering screen is displayed, press

RECALL

Ofour times within five seconds. The PIN code will be cleared and you can enter a new PIN code.

ChangingyourPiN code

Press MENUO and highlight the Locksmenu icon.

Press T to display the PIN code entering screen.

Enter your four-digit PIN code and press @.

Press Y to highlight [,lew PiN Code and press @.

5Press the Number buttons to enter a new four-

digit code. Reenter the PIN code to confirm it.

6Press @. The new PIN code is now active.

Note:

PIN code can not be set to "0000".

BlockingTV programsand movies by rating (V-Chip)

Some TV programs and movies include signals that

classify the content of the program (violence, sex,

(c'onrin ued)

40_46 55G300U EN-ASindb 46 2010/3/16 T@ 05:4&04