Toshiba 40G300U, 40G30U, 55G300U, 46G30U, 46G300U VESAMounting Pattern, Removing the Pedestal Stand

7) VESAMounting Pattern

40"200x200 mmM6

46"400x200 mmM8

55"400x200 mmM8

(mlit in ram)

Removing the Pedestal Stand

1)Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket.

Leave the stand protruding over the edge of the surface.

Note; Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.

2)Remove the four screws shown in the right diagram. This will allow removal of the pedestal stand.

3)Onceyou haveremoved all four screws, holding

the pedestal stand in place, remove the pedestal stand from the TV.

40" TV

VESA Mounting Pattern

Four screws J_qL! 2 Hook

Sturdy strap

(as short as possible)

46" TV

VESA Mounting Pattern

Four screws _L	_2___ J
	Sturdy	strap
55" TV	(as short as		possible)
	VESA Mounting	Pattern

Hook

Four screws

Sturdy strap

(as short as possible)

CAUTION:Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. Tosecure the TV, use a sturdy strap from

the hook(s) on the rear of the TV to a wall stud, pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor.

6

4046 55G_00U EN-ASindb @ 2010/3/16 iv@ 05:48:11