Toshiba 40G30U, 40G300U, 55G300U, 46G30U Using the PC settings feature, Setting the PC Audio, Coiwd

5Press _ to select On. When the control panel is locked and any button o13the control panel (except POWER) is pressed, the message "NOT AVAILABLE" appears.

To unlock the control panel:

Select 0fl in step 5 above, or press and hold the VOLUME- button on the TV control panel for about 10 seconds until the volume icon appears.

Using the PC settings feature

You can view an image from a PC on the TV screen. When a PC is connected to the TV's PC IN

terminal, you can use the PC Settings feature to

make adjustments to the image. If the edges of the picture are cut off, readjust the HorizontalPosition

and Vertical Position. [f the picture is affected by interference, readjust the CJ0CkPhase and SampJing

Clock.

To adjust the PC settings:

1 Repeatedly press _ to select PC input mode (_:_>"Selecting the video input source to view" page 35).

MENU

2 Press O and open the Setup menu.

3 Highlight PC Settings and press @.

Note: lf a PC is not connected or there is no pc input signal this feature will be grayed out in the Setup menu.

4' Press lk or V to highlight the item you want to

adjust.

5 Press 4 or _ to make the appropriate

adjustments.

5O

Note: The screen is disrupted momentarily when adjusting the PC settings. This is not a sign of malfunction.

!i i!ii!i!i!i!!!iiiiiiiiiii!iiiii;ii

Horizontal	Moves	the picture left/right.
Position	The adjustment		range is within _+50from
	center.*
	Moves	the picture		upMown.
Vertical	The adjustment		range is within _+10 from
Position	center.'i_
	Helps to reduce noise and sharpen the
Clock	picture.
Phase	The adjustment		range is within _+16from
	center.'i_
	Helps to reduce noise and minimize
Sampling	periodic vertical stripes on the screen.
Clock	The adjustment		range is within _+10from
	centel:	'i_
Auto	Highlight this		item	then press @
Adjust	to get an optimum			adjustment
	automatically.

*The default settings may vary depending on the input signal format.

Setting the PC Audio

This function allows you to output or mute the sound from your PC when connecting using the PC IN terminal and an analog RGB cable. (_:_ page 18)

To set the PC Audio:

Press MENUO and open the Sound menu.

Highlight Audio Setup and press @.

Press A or V to select PC _ndi0 and then press or _ to select N0 or Yes.

Yes: When viewing the PC input, the audio from the PC Audio input can be heard.

_0: When viewing the PC input, there will be no audio.

Note: Because the PC and HDMI- 7 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio

(co;;_i;;_wd)

_0_46 55G300U EN-ASindb 50 2010/3/16 T@ 05:44:08