Soundproblems
* Check the antenna/cable connections (_ Chapter 2).
. The station may have broadcast difficulties. Try another channel.
. The sound may be muted. Press VOLUME.
. if you hear 11o sound, try setting the MTS feature to Stereomode (_:_ page 45).
. if you are not receiving a second audio program from a known SAP source, make sure the MTS
feature is set to SAP mode (_ page 45).
. if you hear audio that seems "incorrect" for the
program you are watching (such as music or a
foreign language), the SAP mode may be on. Set the MTS feature to Stereo mode (_ page 45).
Remote control problems
•Make sure the remote control is set to the correct device mode (_ page 22).
•Remove all obstructions between the remote control and the TV.
•The remote control batteries may be dead. Replace the batteries (_:_ page 21 ).
•Your TV remote control may not operate certain features on your external device. Refer
to the owner's manual for your other device
to determine its available features, if your TV remote control does not operate a specific feature on another device, use the remote control that came with the device (_ pages
•if the TV still does not act as expected, use the
Reset Factory Defaults procedure (_ page 34).
Channeltuning problems
•Make sure the remote control is set to the correct device mode (_:_ page 25).
•The channel may have been erased from the
channel memory by the Programming channels automaticallyfeature. Add the channel to the
channel memory (_ page 31 ).
•The channel may be blocked by the LOCK feature. Unblock the channel (_ page 48).
•if you are ramble to tune digital channels, check
the antenna configuration (t_ page 30). If you
are still unable to tune digital channels, clear all
channels from the channel list and reprogram
channels into the channel memory (_ page 31 ).
if you are still ramble to tune digital channels,
use the Reset Factory Defaults procedure (_
page 34). Also see "TV stops responding to
controls" and "Other problems" (_ page 62).
Closed caption problems
*if the program or video you selected is not
. if text is not available, a black rectangle may appear. If this happens, turn off the closed caption feature (_v page 43).
. A
correctly in the following situations: a) when
a videotape has been dubbed; b) when the
signal reception is weak; or c) when the signal
reception is nonstandard (_v page 43).
Rating blocking (V-Chip) problems
•if you forget your PIN code: While the PIN
RECALL
code entering screen is displayed, press © four times within 5 seconds. The PIN code you
previously stored will be cleared (_v page 46).
Ho REGZA-LIHRoperation
* The
Toshiba
. Make sure the HDM[ cables with the HDM[
Logo (H_"_t_ITI _) are used.
. When the connected
. if several devices are connected,
feature may not operate properly.
. Read the instruction manual furnished with the
connected
HDMI problems
For HDMI cables
•Make sure to use cables with the HDM[ Logo
_) (_ page 13). |
Hetwork problems
Cannot connect to network
•Check the Router with Hub and the TV
connections (_:_ pages 20).
•Make sure the Router with Hub is connected to
the TV's LAN port correctly (_ page 20).
•Make sure your network address is set up correctly.
No network connection
•The LAN cables are not connected properly or at all. Connect all cables (_:_ pages 20).
•Make sure the power cords of the all devices are plugged in.
•Make sure your network address is set up
CO_Tectly (_:_ "Setting up the network address for the LAN port").
63
_0 46550300U | ENASindb | 63 | 2010/,4/16 q_@05:44:24 |