Toshiba 40G300U, 40G30U manual Usingthe advanced audio, Settings features, UsingNPEGnoisereduction

UsingNPEGnoisereduction

The MPEG noise reduction feature allows you

to reduce visible interference caused by MPEG

compression. Choices for MPEG noise reduction are Off, Low,Middle, and High.Off is automatically

selected when this feature is disabled ("grayed out").

To	select	the	MPEG	noise	reduction	level:
1	Press	MENU	and open	the Picturemenu.
		©
2	Highlight		NoiseReduction		and press	@.

3Press A or V to highlight the MPEGN0ise

Redueli0u field, and then press 4 or _ to select either 0[ Low,Middle or High.

4' To save the new settings, highlight Doneand press @.

To revert to the factory defaults, highlight Reset and press @.

Usingthe GameNode feature

You can use the Game Mode feature for shorter frame delays when playing a video game requiring split-second timing between the on-screen display and input from the controller (such as music creation and high-action games).

This feature is more effective for 480i and 1080i input signals.

Note: To use the Game Mode feature, the current video input must be Video 1, Video 2,

ColorStream liD, HDMI 1, HDMI 2, HDMI 3 or HDMI 4. The Game Mode cannot be turned on

when any other video input is selected.

To turn on Game Mode:

MENU

1 Press O and open the Picturemenu, higlaliglat the GameNode.

Press4or_toselect 0U.

To turn off Game Mode:

Select Off in step 2 above, change the video input, or turn the TV off and then on again.

Note: You can change the video input by

pressing _) on the remote control (_ page

35).

Usingthe advanced audio

settings features

Usingthe QSound® soundfeature

OSouud ® is the original name for a positional three-

dimensional (3D) sound processing algorithm from QSound Labs that creates 3D audio effects from

multiple monophonic sources and sums the outputs

to two channels for presentation over regular stereo speakers.

To adjust the QSound °'>settings:

1Put the TV in STEREO mode (_ "Selecting

stereo/SAP broadcasts" on page 45).

Press MENU0 and open the S0uud menu.

3 Highlight AdvancedAudioSettingsand press @.

Dess Y or A to highlight the QSound feature,

and then press 4 or _ to turn the QSound effect On or Off

To save the new settings, highlight Doue and

press @.

To revert to the factory defaults, highlight Reset

and press @.

Note: If the broadcast is monaural, the QSound effect will not work.

fil

40_46 55G300U EN-ASindb @l 2010/3/16 T@ 05:44:22