Toshiba 13A26C, 19A26C manual Using the Lock Menu, To turn off the Video Lock

USING THE LOCK MENU

The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME TIMER and CHANGE PASSWORD functions. You can use these functions after entering the correct PASSWORD.

TO REGISTER YOUR PASSWORD

1	Press MENU and then press SET + or – until the indicator
	next to “LOCK” begins to flash, then press ENTER.
2	Enter your 4-digit password using the Channel Number
	buttons (0–9).
	If you enter an incorrect password, press RESET, and
	then press ENTER.
3	Enter the password again, and then press ENTER.
	The password is now registered and the LOCK menu
	appears.

NOTES:

•To change your password, follow steps 1 and 2 and select “CHANGE PASSWORD” option. Then enter your new password.

•If you forget or lose your password, you can reset it using the following procedure:

-While holding down the VOLUME ∞ button on the TV, press “0” on the remote control for a few seconds.

LOCKING CHANNELS

With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting. You can choose to lock up to nine TV channels and nine cable channels.

1

2

3

Use the Channel Number buttons (0–9) to tune the television to the channel you wish to lock.

Press MENU, then press SET + or – until the indicator next to “LOCK” begins to flash. Then press ENTER.

Use the Channel Number buttons (0–9) to enter your password, then press ENTER.

6	Repeat steps 1 through 5 to lock other channels. When you
	are finished locking channels, repeatedly press MENU until
	the menu screen closes.

If you try to tune a locked channel, the TV will not display it, but will display the nearest unlocked channel.

NOTES:

4

5

The LOCK menu appears.

Press SET + or – until the indicator next to “CH LOCK” begins to flash, then press ENTER.

Press SET + or – to select:

•INPUT: To select the channel as one to be locked. Then press ENTER.

•ALL CLEAR: To clear all channels from the list of locked channels. Then press

ENTER.

LOCK CH LOCK VIDEO LOCK GAME TIMER CHANGE PASSWORD

〈+ / – / ENTER / MENU 〉

	CH LOCK
	CABLE
	INPUT ---	---	---
---		---	---
---		---	---
	ALL CLEAR

〈+ / – / ENTER / MENU 〉

•If you are accessing the LOCK menus for the first time, choose a four-digit number to be your password.

•After programming CH LOCK, change channels before turning off the television.

•To unlock all channels, select ALL CLEAR in step 5, then press ENTER.

LOCKING VIDEO INPUT

You can use the VIDEO LOCK feature to lock the input source (VIDEO) and channels 3 and 4. You will not be able to select the input sources with the TV/VIDEO button or Channel Number buttons unless you clear the setting.

1	Press MENU, then press SET + or – until the indicator
	next to “LOCK” begins to flash, then press ENTER.
	Use the Channel Number buttons (0–9) to enter your
2
	password, then press ENTER. The LOCK menu appears.
	Press SET + or – until the indicator
3		VIDEO LOCK
	next to “VIDEO LOCK” begins to flash,	OFF
	then press ENTER.	VIDEO
		VIDEO+
4	Press SET + or – to select:	〈 + / – / ENTER / MENU 〉
	• OFF: Unlocks all video input sources.

•VIDEO: Locks VIDEO.

•VIDEO +: Locks VIDEO, channel 3, and channel 4. This option should be used if you use the antenna to play a video tape.

5 Repeatedly press MENU until the menu screen closes.

NOTE:

After programming VIDEO LOCK, change channels or press the TV/VIDEO key before turning off the television.

SETTING THE GameTimer™

You can use the GameTimer™ feature to automatically activate the VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a video game (30, 60, 90, or 120 minutes).

1	Press MENU, then press SET + or – until the indicator next to
	“LOCK” begins to flash, then press ENTER.
	Use the Channel Number buttons (0–9) to enter your
2
	password, then press ENTER. The LOCK menu appears.
	Press SET + or – until the indicator next	￿￿￿￿￿￿	￿￿￿
3
	to “GAME TIMER” begins to flash, then
	press ENTER.
	Press SET + or – to select a time limit
4		〈 ￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉
	(30 minutes, 60 minutes, 90 minutes,
	120 minutes, or OFF).
	Repeatedly press MENU until the menu screen closes.
5
	After the GameTimer is programmed, a display will appear
	briefly every ten minutes to remind you that the GameTimer
	is operating.
	When the programmed end time is reached, the TV will
	change the channels automatically and the VIDEO LOCK
	feature will be activated.
	To turn off the VIDEO LOCK:
	See “LOCKING VIDEO INPUT,” at left.

11

3X00221A(E)_P08-12 11 05.12.23, 9:29 AM