Adjusting the picture quality settings
To create your own setting (1)
1 Use the cursor button (3) to select [Start] then press ENTER.
Video Memory Select
Video Setup
2 Use the cursor button (∞) to select [Video
Setup] then press ENTER.
Video Memory Select
Video Setup
3 Use the cursor buttons (2/3) to select the setting to [On] or [Off].
|
|
|
|
Fine Focus |
| On | Off |
Move | ENTER Select | DISPLAY Check | |
|
|
|
|
4 Use the cursor buttons (5/∞) to select the setting to adjust.
You can adjust any or all of the following picture quality factors:
Fine Focus
Switch on to reveal greater detail (higher resolution) in the picture.
Contrast
Adjusts the contrast of the elements in the picture.
Sharpness
Adjusts the sharpness of the
Chroma Level
Adjusts how saturated colours appear.
Hue
Adjusts the overall colour balance between red and green. (This is only effective when the player is connected using the VIDEO OUT or
5 Use the cursor buttons (2/3) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes immediately.
32
6 Repeat steps 4 and 5 to make adjustments to other settings.
If you would like to save the settings in the player’s memory, be sure to select either [1], [2], or [3] in the [Memory] setting to establish which memory location to save the new settings in. Please note that if you select a location where settings have already been saved, the old settings will be replaced by the new ones.
|
|
|
|
|
Memory |
| Off | 1 | 2 3 |
Move | ENTER Select | DISPLAY | Check | |
|
|
|
|
|
7 When you are finished making adjustments, press ENTER to establish the new settings.
To create your own setting (2)
1 Use the cursor button (3) to select [Start] then press ENTER.
Video Memory Select
Video Setup
2 Use the cursor button (∞) to select [Video
Setup] and press ENTER.
3 Press DISPLAY.
|
|
|
|
|
|
|
|
|
|
| Fine Focus |
|
| On |
| Off |
| ||
| Contrast | min |
|
|
|
| max |
| |
| Sharpness | soft |
|
|
| fine |
| ||
| Chroma Level | min |
|
|
| max |
| ||
| Hue | green |
|
|
| red |
| ||
| Memory |
| Off | 1 | 2 3 |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 Use the cursor buttons (5/∞) to select the setting and use the cursor buttons (2/3) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes immediately.
5 To memorize the setting, select [Memory1, 2, 3], then press ENTER.
The previous setting will be erased.
En