Video Connections
This player features
Check the manual supplied with your TV or monitor to determine the best possible connection for your system. In addition to making physical connections to your TV or monitor, it is also necessary to assign the TV screen size. You
COMPONENT VIDEO OUT
•Make component video connections to a TV or monitor with component inputs to produce a higher quality video image.
•Use a component video cable or 3 video cords (not supplied) to connect the COMPONENT VIDEO OUT jacks on the player to the component jacks on the monitor.
can use the [Setup Navigator] in the Setup screen General to set whether you are using a wide screen or standard size TV or monitor (page 18). Additionally, you can use the [TV Screen] setting in the Setup screen Video 1 menu (page 29).
S-VIDEO OUT
•Make
•Use an
CONTROL | VIDEO OUT | COMPONENT | AUDIO OUT | DIGITAL OUT | |
|
| VIDEO OUT |
|
| OPTICAL COAXIAL |
| S | Y |
|
| AC IN |
IN | PB | R | L |
| |
PR
TV or monitor
VIDEO OUT
S
CONTROL | VIDEO OUT | COMPONENT | AUDIO OUT | |
|
| VIDEO OUT |
|
|
| S | Y |
|
|
IN | PB | R | L | |
|
| |||
PR
COMPONENT
VIDEO OUT
Y 
PB
PR
DIGITAL OUT
OPTICAL COAXIAL
AC IN
TV or monitor
COMPONENT
VIDEO IN
Y
PB
PR
VIDEO OUT
•Make composite video connections to a standard TV or monitor with a video input jack.
•Use the supplied video cable to connect one of the VIDEO OUT jack on the player to the video input on the TV or monitor.
•Be sure to match the color of the plug with the color of the jack (yellow).
CONTROL | VIDEO OUT | COMPONENT | AUDIO OUT | DIGITAL OUT | |
|
| VIDEO OUT |
|
| OPTICAL COAXIAL |
| S | Y |
|
| AC IN |
IN | PB | R | L |
| |
PR
TV or monitor
VIDEO OUT
S
VIDEO IN
16
System Control Connections
Using a commercially available cord with a mini plug
(3.5 mm dia. with no resistance) to connect this player’s CONTROL IN jack to the CONTROL OUT jack of another PIONEER component bearing the Î mark, you can control the player as though it were a component in a system (system control).
•If you connect for system control, you cannot operate the player directly. Point the remote control unit at the component (AV amplifier, etc.) connected to the CONTROL OUT jack to operate.
•When controlling as a system, be sure to make a connection to the amplifier using an audio or video cord, even when using only digital components.
•For details, refer to the operation manuals of the connected components.
CONTROL | VIDEO OUT | COMPONENT | AUDIO OUT | DIGITAL OUT | |
|
| VIDEO OUT |
|
| OPTICAL COAXIAL |
| S | Y |
|
| AC IN |
IN | PB | R | L |
| |
PR
Pioneer component with Î mark.
CONTROL
IN
CONTROL
OUT
En