Some settings in the Setup Menu do not appear.
\The Setup Menu Mode is set to [Basic]; set it to [Expert] (page 25).
Audio is not output or is distorted.
The Setup screen Audio 1 menu [96 kHz PCM Out] setting is set to [96 kHz].
\Either connect using the analog outputs, or set [96kHz PCM Out] in the Audio 1 menu to [96kHz
3 48 kHz] (pages 15, 27).
The disc is dirty.
\Refer to ‘Disc Care’ (page 56).
The connection plugs are not inserted fully into the terminals or are not connected.
\Check that all connection plugs are firmly inserted.
The connection plug or terminal is dirty.
\Check that the plugs and terminals are wiped clean of dirt, etc.
Audio cable connection is wrong.
\Check to make sure that the audio cables are connected correctly (page 15).
Connection is made to the stereo amplifier‘s PHONO input terminal.
\Change connection to any input terminal except
PHONO.
The pause mode is engaged.
\Press PLAY 3 or PAUSE 8 to exit the pause mode.
Stereo amplifier operation is incorrect.
\Check input (CD, AUX, etc.) selector to determine if it is selected for DVD playback.
Noticeable difference in DVD and CD volume.
DVDs and CDs use different recording methods.
\This is not a malfunction.
No DTS audio output.
\You can only play DTS discs if you have a DTS- compatible amplifier or a DTS decoder. From the disc menu screen, or using the AUDIO button, select a
\If this unit is connected to a
\If this unit is connected to a
“DTS DIGITAL OUT OFF” is displayed on-screen.
If this unit is connected to a
The disc containing the MP3 tracks won’t play.
If the disc is a recordable CD, make sure that the disc is finalized. If the message “UNPLAYABLE MP3 FORMAT” is displayed when you try to play a disc/ track:
\Check that the track(s) are in the MPEG1 Audio Layer 3 format.
\Check that the sampling rate of the track(s) are 44.1 or 48kHz.
Some MP3 tracks appear to be missing from a disc.
\If a track name does not end in “.mp3” or
“.MP3”, this player will not recognize it as an MP3 track.
\This player only recognizes the first 250 folders and tracks on a disc. If there are more folders/ tracks than this, you will not be able to play them.
\This player is not compatible with
The audio recorded on the disc is not output properly.
\If the audio is switched to [2] when playing a Super VCD that contains only one stereo soundtrack, there may be no sound at all. To restore the sound, return the AUDIO button back to its original position (page 35).
There is a howling or
The mic is too close or pointing towards the speakers.
\Try to keep the mic pointed away from the speakers.
\Turn down the volume on the mic.
Karaoke functions are not possible. (DV-533K only)
A mic is not connected to the player or is not turned on.
\Check that a mic is connected to the player. If the mic has an on/off switch, check that the mic is switched on.
The mic volume is turned down all the way.
\Adjust the mic volume so that vocals can be heard.
Caution
Static electricity or other external influence may cause malfunctioning of this unit. In this case, unplugging the power cord and then
60
En