OPERATING INSTRUCTIONS - THE DVD MENU DISPLAY
All of these menus are accessed from the blue Cambridge Logo screen that appears when the DVD player is on with no disc in the tray. Pressing the MENU button on the remote brings up the DVD menu display. It is accessed by the cursors and select button in the centre of the remote.
General Setup
TV Display: Allows you to alter between 16.9 widescreen and 4.3 conventional image.
OSD Lang: Alters the language that the menu will appear in.
SCART: Switches the SCART output between RGB and Component. You will need a suitably equipped television to handle a component signal.
Screensaver: If the DVD is left on and inactive, it will switch to a screensaver to minimise energy consumption and screen burn. It can be switched off here.
Logo Type: The 540D comes with a blue Cambridge Logo background but it is also possible to "capture" a screenshot of a film and use this as your default background instead. You can choose a screenshot from a film by pressing the "LOGO" button on your remote control. This image is stored and can now be used as a background on the menus.
Spectrum: This setting activates a graphic equaliser on the screen showing the soundtrack. This is most useful for audio CD's.
Speaker Set Up
Downmix: Switches off the surround soundtrack (5.1 analogue output section) and outputs a stereo signal from the stereo analogue output.
Front, Centre and Rear Speaker Settings: adjusts the DVD decoder to compensate between large and small speakers and the size of the signal it sends to the subwoofer.
Subwoofer Off/On: Informs the player if a subwoofer is present. If it is present the low frequencies are split off and sent to the subwoofer, if not the complete audio spectrum will be heard through the front channel.
Channel Delay: Allows the distance between the listening position and the centre, subwoofer, rear left and rear right speakers to be individually set (in cm). This is to enable the surround sound to be optimised for different listening room sizes and shapes.
Audio Setup Page
EQ: Adjusts the final effect of the stereo output with a number of optional presets.
Soundfield: Adjusts the final effect of the decoder output with a number of surround effects presets.
SPDIF output: Switches the digital audio section of the decoder/output between bitstream (Raw) and uncompressed stereo digital out (PCM). The bitstream (Raw) must be selected to enable surround sound (Dolby digital/DTS) to be sent to an external decoder via the audio digital output (coaxial or optical). If a only a stereo speaker system is to be
10azur 540D DVD player