Connections
Connecting to a TV / AUDIO System
Video Cable
C igarette
J ack
Rear Panel
FM Antenna
Audio Cable 
or
Car FM Tuner
TV or Monitor with
Audio/Video Inputs
1.Connect the audio cables between the Audio Out L and R jacks on the back of your DVD player and the corresponding Audio Input jacks on your audio system. You can listen more loudly to the sound of audio CDs and DVD video discs in stereo when you are using a FM modulator.
2.Connect the video cables between the Video Out jacks on the back of your DVD player and the corresponding Video Input jacks on your TV.
Caution 
When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the power source before making any connections.
Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume level.
Turn off the receiver before you connect or disconnect the DVD player's power cord. If you leave the receiver power on, the speakers may be damaged.
Warning 
Do not set the Digital Audio Output of this DVD player to "PCM" unless you are connecting the Digital Audio jack of this DVD player to an AV decoder that has Dolby Digital decoding function.
High volume sound may damage your hearing as well as speakers.
19