Connections
Connecting to a Dolby Digital Amp
Video Cable
Rear Panel
75 ohm Coaxial Cable
or
Audio Cable
To digital audio output
Front
SpeakerCenter Speaker
(left)
Receiver equipped with a Dolby digital decoder
Front Speaker (right)
Sub
Speaker
Rear Speaker | Rear Speaker |
(left surround) | (right surround) |
DVD disc must be recorded in Dolby Digtal.
You must have Dolby Digital decoder or 6 channel Amp, 5 speakers and 1 bass woofer.
You must set Digital Out of AC3 at "Raw" in Audio Setting
This product is manufactured by technical
this symbol and trademark are reserved for Dolby Laboratories.
Dolby Laboratories Inc. All rights Reserved.
Caution When connecting an amplifier equipped with Dolby Digital, connect it in the same way as shown above
When connecting it, refer to the Audio system's manual.
Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume level.
Turn off the receiver before you connect or disconnect the DVD player's power cord. If you leave the receiver power on, the speakers may be damaged.
20