Onkyo DV-CP706 instruction manual Rear Panel, 5 6

Controls & Connectors—Continued

Rear Panel

1 2 3 4 5 6 7 8 9

AANALOG AUDIO OUTPUT

These RCA/phono connectors can be connected to analog audio inputs on a hi-fi amp, or AV receiver.

B REMOTE CONTROL

These (Remote Interactive) connectors can be

connected to the connectors on your other Onkyo AV components for interactive control.

If you’re using RIHD, do not connect anything to these connectors.

COPTICAL AUDIO OUTPUT

This optical digital audio output can be connected to an optical digital audio input on a hi-fi amp, AV receiver, or surround sound decoder (Dolby Digital, DTS).

DCOAXIAL AUDIO OUTPUT

This coaxial digital audio output can be connected to a coaxial digital audio input on a hi-fi amp, AV receiver, or surround sound decoder (Dolby Digital, DTS).

EHDMI OUT

This HDMI jack outputs digital video and audio and can be connected to an HDMI input on a compatible TV or other component.

FVIDEO OUTPUT

This RCA/phono connector can be used to connect a TV or projector with a composite video input.

GS VIDEO OUTPUT

This connector can be used to connect a TV or pro- jector with an S-Video input.

HCOMPONENT VIDEO OUTPUT

These RCA/phono connectors can be used to con- nect a TV or projector with component video inputs.

IAC INLET

The supplied power cord connects to this polarized inlet. The other end of the power cord should be connected to a suitable wall outlet. On the Austra- lian model, the power cord is not polarized.

See page 19–22 for connection information.

14