Onkyo Powering Up & Setting Up the DV-CP706, Powering Up the DV-CP706, First Time Setup

Powering Up & Setting Up the DV-CP706

ON/STANDBY	3	To turn on the DV-CP706, press
		the [ON/STANDBY] button (or the
		remote controller’s [ON] button).
		The DV-CP706 comes on, the display
		lights up, and the STANDBY indicator
		goes off.
	Remote controller To turn off the DV-CP706, press the
		[ON/STANDBY] button (or the remote
STANDBY indicator		controller’s [STANDBY] button). The
		DV-CP706 enters Standby mode and
		the STANDBY indicator comes on.

ON

STANDBY

ENTER

Powering Up the DV-CP706

Before connecting the power cord, connect all your AV components (see page 18 to page 22).

Don’t forget to turn on your TV or projector and select the video input to which the DV-CP706 is connected. If you’re using a hi-fi amp, AV receiver, or surround sound decoder for audio playback, turn that on as well and select the audio input to which the DV-CP706 is connected.

1	Connect the supplied power cord
	to the DV-CP706’s AC INLET.
2	Plug the other end of the power
	cord into a suitable wall outlet.
	The DV-CP706 enters Standby mode,
	and the STANDBY indicator comes on.
	When you disconnect the power cord,
	always disconnect it from the wall out-
	let first, and then the DV-CP706’s AC
	INLET.

First Time Setup

The very first time you turn on your DV-CP706, the Ini- tial Setup menu appears on-screen, as shown.

Initial Setup

TV Shape

4:3 Letter box

HDMI Output Setting

4:3 Pan Scan

On-Screen Language

16:9 Widescreen

√ 16:9 Compressed

Here you need to specify the size of your TV (standard 4:3 or widescreen 16:9), specify a HDMI output setting, and select a language for the on-screen setup menus. You can change these settings later by using the on-screen setup menus (see page 43).

1	Use the remote controller’s Up/
Remote controller	Down [ ]/[ ] buttons to select aTV
	shape, and then press [ENTER].
	See page 44 for more information on
	the TV Shape options.
	The HDMI Output Setting menu
2	appears.
	Select a HDMI Output Setting
Remote controller	option, and then press [ENTER].
	See page 45 for more information on
	the HDMI output options.
	The On-Screen Language menu
	appears.
3	Select a language, and then
Remote controller	press [ENTER].
	See page 47 for more information on
	the language options.

The Initial Setup menu closes.

23