Audio Menu

Conﬁguring the DV-CP706—Continued

Video Black Level

With this setting you can adjust the picture blackness of analog video output.

Light: Blacks are lighter, and the entire picture becomes lighter.

Dark: Blacks are darker, and the entire picture becomes darker.

On the North American model, Light is the default set- ting. On the Australian model, Dark is the default setting.

Brightness

With this setting you can adjust the picture brightness.

1-7:1 is the darkest. 7 is the brightest. The default brightness is 4 (default).

Sharpness

With this setting you can adjust the picture sharpness.

1-7:1 is the softest. 7 is the sharpest. The default sharpness is 4 (default).

PAL Output Setting (Australian model only)

With this setting you can specify how the DV-CP706 outputs video signals.

AUTO (default): Use this option to watch PAL and NTSC format discs. The DV-CP706 does not convert the video format. When you play a PAL disc, the video output will be PAL format. And when you play an NTSC disc, it’ll be NTSC format. Your TV must support NTSC playback in order to watch NTSC for- mat discs.

NTSC: Use this option if you want to play only NTSC format discs. When you play a PAL disc, the DV-CP706 will convert PAL format video signals to NTSC-compatible format.

PAL: Use this option if your TV doesn’t support NTSC playback, or the picture is distorted when watching NTSC discs. The DV-CP706 will convert NTSC format video signals to PAL-compatible for- mat.

Note:

• This setting can also be changed by pressing and hold-

ing the Next button, and then pressing [ON/ STANDBY] button.

Digital/HDMI Audio Out

With this setting you can conﬁgure the optical, coaxial, and HDMI digital outputs.

All (default): Dolby Digital and DTS signals are out- put as they are.

PCM: Dolby Digital signals are down mixed to 2 channels and output as PCM.

Off: No digital signals are output.

Linear PCM Out

With this setting you can conﬁgure the DV-CP706 to output digital audio with higher sampling rates (e.g., 96 kHz) as it is or down sample it to 48 kHz.

If the AV component you connect to the DV-CP706’s digital audio outputs supports 96 kHz digital audio, select Down Sample Off. Otherwise, select Down Sam- ple On.

Down Sample On: 96 kHz digital audio is down sampled and output at 48 kHz.

Down Sample Off (default): 96 kHz digital audio is

output as it is.

Notes:

•Some copy-protected DVD-Video discs may use

96 kHz digital audio only for A/D conversion to the analog audio outputs.

•With some discs, even if you select Down Sample Off, the digital audio will be down sampled to 48 kHz, and in some cases may not be output by the DV-CP706’s digital audio outputs.

Dynamic Range Control (Dolby Digital only)

With the Dynamic Range Control function you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts even when listening at low volume levels—ideal for watching movies late at night when you don’t want to disturb anyone.

On: The dynamic range of Dolby Digital material is compressed.

Off (default): The full dynamic range is preserved.

Notes:

•The impact of the Dynamic Range Control function depends on the Dolby Digital material that you are playing and with some material there will be little or no effect.

•When the DV-CP706 is set to Standby, this function is automatically set to off.